In this article, a novel tree-type channel reconfigurable field-effect transistor (RFET) is proposed to obtain improved ON-state performance. Compared with the conventional nanosheet (NS) channel structure, an additional interbridge (IB) channel is vertically intersected in tree-type RFET. Geometry parameters of IB and NS, along with various gate dielectric materials with fixed EOT, are investigated in the point of threshold voltage ( ${V}_{\text {TH}}$ ) and on-state current ( ${I}_{ {\mathrm {\scriptstyle{ON}}}}$ ). When high- ${k}$ gate dielectric is adopted, the large cross-sectional area of IB will provide a better ON-state characteristic because of the larger tunneling area. Compared with the conventional NS RFET, ${I}_{ {\mathrm {\scriptstyle{ON}}}}$ of tree-type RFET with IB width ( ${W}_{\text {IB}}$ ) = 5 nm, NS space ( ${S}_{\text {NS}}$ ) = 25 nm, and HfO 2 gate dielectric is separately demonstrated to improve by 44.6% and 60.2% for n- and p-type program, while in the case of SiO 2 gate dielectric, suitable size parameters should be selected to obtain an improved ON-state current because of the tunneling strength. The underlying physical mechanism is discussed in detail.
7 January 2020 in IEEE Transactions on Device and Materials Reliability
In this work, dc characteristic variations of nanosheet (NS) gate-all-around (GAA) complementary FET (CFET) induced by process fluctuations are investigated for the first time. Four process variability sources including work-function variation (WFV), line edge roughness (LER), gate edge roughness (GER), and random dopant fluctuation (RDF) are characterized. Compared to the conventional NA GAA FET, the differences mainly exist in GER. The electrostatic potential variation induced by GER in CFET is affected by both the common metal gate and the additional p-type work-function (p-WF) liner for p-FET. Therefore, the impact of GER on p-FET is much larger than n-FET as well as conventional NS GAA FET. Thickening the p-WF liner is proposed to overcome the drawback. Calculated overall variations considering all process fluctuation sources are also discussed, highlighting the impact of the dual-WF gate on p-FET. The results are helpful for the characterization and optimization of variations in CFET and precise CFET-based circuit design.
In this article, the impact of self-heating effect (SHE) on nanosheet gate-all-around (GAA) transistor with a vertical combo spacer and different underlap/overlap channels is studied by the 3-D TCAD simulation. To achieve high authoritative evidences, the Id-Vg characteristic with SHE is calibrated with the experimental data. First, the change of electrical characteristic introduced by different dielectrics of a single-k spacer is investigated, and the results show that the current of on-state (Ion) is a power function of relative permittivity, whereas the off-state (Ioff) exhibits a linear dependence. Second, a novel vertically wrapped combo spacer is proposed to achieve a compromise between thermal characteristic and electrical performance for the first time. The electrothermal characteristics of the combo spacer under different underlap/overlap channels are also studied, and the results showed that the combo spacer composed of inner Si₃N₄ and outer HfO₂ has the highest Ion/Ioff but smaller thermal resistance and lower lattice temperature compared with other different combinations. At last, a CMOS inverter with Si₃N₄/HfO₂ combo spacer is demonstrated for its improvement in propagation delay.
26 August 2022 in IEEE Transactions on Electron Devices
The thermal–mechanical and signal reliability of through-silicon via (TSV) occupies an important position in three-dimensional integrated circuits (3D-ICs). However, few studies combined the thermal–mechanical and signal reliability are found. In the work, a new differentiated structure of TSV is proposed to decrease the peak thermal stress without affecting signal integrity. The effect of TSV diameter on the peak thermal stress and its location is deeply investigated to decrease the stress. Compared with regular TSV, the differentiated TSV can reduce 22% peak thermal stress and 68% occupied silicon area. More differentiated TSVs can be placed in the same Si substrate by considering the influence of thermal stress between TSVs. Meanwhile, the differentiated TSV can better shield crosstalk noise with ensuring signal integrity.