Application of the fibre-reinforced concrete has manifested a wider acceptability over time for its contribution towards significantly improving the flexural performance of structural members. A lot of work has been done to understand the influence of fibres on the mechanical and structural behaviour of reinforced concrete. Towards this end, several researchers have experimentally investigated the residual flexural strength to characterize the fibre-reinforced concrete. The number of influencing parameters to be investigated through experiments is mostly limited because of the time and cost implications. Consequently, validation of the experimental investigations through analytical models and further utilizing these models to study the behaviour in greater detail is a viable option for researchers. As part of this work, an analytical investigation has been performed to investigate the performance of full-scale polypropylene fibre-reinforced concrete beams. The models have been validated through comparison with the observed performance during an experimental investigation where tests on twelve full-scale FRC beams were performed. Three-dimensional finite element models of the beams under 4-point loading were prepared and the post-cracking flexural performance of FRC beams has been investigated by varying the dosage of polypropylene fibres obtained from shredding medical face masks.
7 September 2026 in Materials Today Communications
The paper is devoted to the turbomachinery vibration processes investigation. It is based on the hypothesis that such process as forced vibration, high temperature and centrifugal force, constructional damping parameters put the main impact in the gas turbine rotors decrease. For these studies the special refined mathematical model was used. For these model the special space finite elements have been developed, that gives an opportunity to make the approximation of various turbine blades geometry. The model verification has been done by the usage the modern highly automatized experimental equipment that is based on the holographic interferometry method application in real time. The first impeller cooled blades forced vibration parameters have been determined for several most dangerous forced vibration modes, temperatures up to 1000oC and angular velocities of shaft rotation, corresponding with the gas turbine engine normal working regime. Results of calculations data together with the previous studies in the fields of gas turbine engines flow dynamics, heat exchange, stress-strain state can be used in further studies of turbomachinery fracture mechanics area.