A microbial fuel cell (MFC) is a type of bio-electrochemical system with novel features, such as electricity generation, wastewater treatment, and biosensor applications. In recent years, progressive trends in MFC research on its chemical, electrochemical, and microbiological aspects has resulted in its noticeable applications in the field of sensing. This review was consequently aimed to provide an overview of the most interesting new applications of MFCs in sensors, such as providing the required electrical current and power for remote sensors (energy supply device for sensors) and detection of pollutants, biochemical oxygen demand (BOD), and specific DNA strands by MFCs without an external analytical device (self-powered biosensors). Moreover, in this review, procedures of MFC operation as a power supply for pH, temperature, and organic loading rate (OLR) sensors, and also self-powered biosensors of toxicity, pollutants, and BOD have been discussed.
5 September 2014 in Polymers for Advanced Technologies
SMFCs are a bioelectricity production technology for low power applications. Recent advances in SMFCs are investigated to enhance their performance. Power improvement and organic matter reduction in SMFCs enlarge their range of applications.
Microbial fuel cells (MFCS) is a promising and expanding technology able to eliminate various pollutants of wastewater while converting its chemical energy into power energy using biocatalysts. The potential application of double-chamber microbial fuel cell (DC-MFC) for chemical oxygen demand (COD) removal and generated power from wastewater in the different conditions is investigated. DC-MFC is operated with anaerobic sludge as an active biocatalyst in an anode section, an aerobic cathode section and a Nafion117 membrane as a separator. The performance of the bioreactor is determined with different concentrations of chemical oxygen demand (COD) loadings in the MFC process, in terms of COD removal, power generation and columbic efficiencies. The results illustrated that COD removal efficiency increased at the high concentrations of organic matter. So that at COD concentration of 2000.0 mg/L the highest COD removal efficiency (84%) was obtained. But with increasing substrate initial concentration to 10000.0 mg/L the efficiency decreased to 79%. The important outputs of the system like the highest voltage, maximum generated power, current density, and energy efficiency with the 100,000 mg/L COD are 447 mV, 50.7 mW/m2, 570.0 mA/m2, and 18.6%, respectively. The optical density levels increased due to bacterial growth while pH severely decreased in the anode chamber when using high-concentration substrates in the MFC. GRAPHICAL ABSTRACT