Chavalit - Ratanatamskul

Prof. Dr. Chavalit - Ratanatamskul

Chulalongkorn University, Bangkok, Krung Thep Maha Nakhon, Thailand
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 July 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
GWGabisa Elias Wagari
Gabisa Elias Wagari
CRChavalit - Ratanatamskul
Chavalit - Ratanatamskul
Shabbir GheewalaShabbir Gheewala
Shabbir Gheewala
Plastic waste is the most challenging type of waste because its generation rate (consumption rate) is high, and the current recycling rate is low. The increase in the production and disposal of plastics has led to significant environmental problems including greenhouse gas (GHG) emissions, microplastic pollution, and resource depletion. The study aimed at quantifying the potential environmental effects reduction achieved by recycling the most widely consumed polymers. One approach to establishing a circular economy for plastics is recycling. Plastic recycling as a strategy to reduce life cycle GHG emissions, microplastic emissions, and resource depletion was investigated. Life cycle assessment methodology was employed, considering cradle-to-gate as a system boundary. The results showed that recycling can significantly reduce life cycle GHG emissions and resource depletion. Replacing the virgin material with recycled material reduces the emission to −67 MtCO2e. Recycling could have saved 56.8 million microplastic emissions per year. However, mechanical recycling, which is commercialised nowadays, contributed to an increase in microplastics as much as 2.4 × 109 million particles per year. Recycling will also save about 50 million tonnes of resources from depletion worldwide by recycling around 20 Mt plastics. However, microplastic emissions reduction in the present scenario of mechanical recycling is not possible unless other mechanisms to capture the emitted microplastics are introduced or other recycling methods, such as chemical recycling, are employed.

14 April 2015 in Environmental Science and Pollution Research
Verified
Journal Article
Closed access
PDF file
CRChavalit - Ratanatamskul
Chavalit - Ratanatamskul
TSTawinan Saleart
Tawinan Saleart

27 July 2022 in ACS Omega
Verified
Journal Article
Open access
PKPyae Phyo Kywe
Pyae Phyo Kywe
CRChavalit - Ratanatamskul
Chavalit - Ratanatamskul
This research investigated the feasibility of enhancing ammonia recovery from wastewater using a negatively charged poly(tetrafluoroethylene) (PTFE) membrane in a direct contact membrane distillation (DCMD) system. The influences of phosphate solution types (as the permeate solutions) and feed pH on ammonia recovery were analyzed. Three types of permeate solutions-DI water and two types of phosphate solutions (H3PO4 and KH2PO4)-were investigated for recovery of ammonia gas on the permeate side. From the obtained results, the H3PO4 solution was found to be the most suitable permeate solution to recover ammonia gas in the DCMD operation with the highest overall ammonia mass transfer coefficient of 7.4 × 10-5 m/s, compared to values of 1.2 × 10-5 and 2.4 × 10-5 m/s for DI water and KH2PO4 solution, respectively. Moreover, an increase in the H3PO4 concentration from 0.3 to 0.5 M in the permeate solution also could significantly enhance ammonia recovery. With an increase in the feed pH from 10.0 to 11.8, the ammonia recovery could be enhanced to 92.98% at a pH of 11.8. Liquid ammonium phosphate fertilizer could be produced by the DCMD system with the use of 0.5 M H3PO4 solution. Therefore, the DCMD process using a negatively charged PTFE membrane with an appropriate permeate solution is one of the challenging processes for ammonia recovery from wastewater to promote the circular economy concept.

1 September 2016 in International Biodeterioration & Biodegradation
Verified
Journal Article
Closed access
OTOrnuma Taeporamaysamai
Ornuma Taeporamaysamai
CRChavalit - Ratanatamskul
Chavalit - Ratanatamskul

4 January 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
PKPiyathida Khantibongse
Piyathida Khantibongse
CRChavalit - Ratanatamskul
Chavalit - Ratanatamskul
This research examined the possible pathway of monosaccharide production from the rice straw waste using three integrated enzymatic hydrolysis approaches: boiled hot water pre-treatment with enzyme, alkaline pre-treatment with enzyme, and acid pre-treatment with enzyme, that can be further used as the feedstock for anaerobic digestion. Two cellulase enzymes: SIGMA-ALDRICH laboratory grade cellulase from Aspergillus niger and atres Zymix plus as a commercial cellulase enzyme were applied. It was found that the boiled hot water pre-treatment with the commercial cellulase gave the highest total monosaccharides yields. Glucose was the most significant part (78–86%) of the monosaccharides. For the pre-treatment with dilute acid, glucose was also the main component of monosaccharides; however, for the alkali pre-treatment, xylose was the main monosaccharide. It made up 48–85% of the total monosaccharide compared to glucose that made up 5–49% of total monosaccharide. Boiled rice straw with commercial cellulase enzyme provided the highest glucose yield compared to other experiments. Moreover, the obtained results from GC–MS/MS analysis show that up to 62 species of phenolic compound could be found in enzymatic hydrolysis of the rice straw waste. Aromatic and aliphatic hydrocarbon substances were also detected in the FEEM analysis. From the overall results, the integrated enzymatic hydrolysis with boil hot water pre-treatment was the most efficient method for monosaccharide production from the rice straw waste.

23 May 2018 in RSC Advances
Verified
Journal Article
Open access
PDF file
Wenchao XueWenchao Xue
Wenchao Xue
KSKaung Ko Ko Sint
Kaung Ko Ko Sint
CRChavalit - Ratanatamskul
Chavalit - Ratanatamskul
PPPiyasan Praserthdam
Piyasan Praserthdam
KYKazuo Yamamoto
Kazuo Yamamoto
Commercial forward osmosis membranes were modified by TiO2 nanoparticles. A designed MEMO–PMMA–Br monomer chain to reduce the damage on polymer membrane by TiO2. Water permeability and fouling resistance were significantly improved.