Manieniyan Veerasigamani

Dr. Manieniyan Veerasigamani


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 October 2020 in Clean Technologies and Environmental Policy
Verified
Journal Article
Closed access
PDF file
MSM. Sonachalam
M. Sonachalam
PPP. PaulPandian
P. PaulPandian
MVManieniyan Veerasigamani
Manieniyan Veerasigamani

2 January 2022 in International Journal of Ambient Energy
Verified
Journal Article
Closed access
SMSonachalam Muthuswamy
Sonachalam Muthuswamy
MVManieniyan Veerasigamani
Manieniyan Veerasigamani
In the latest Compression Ignition (CI) engines, a gaseous fuel plays a significant role because they have the advantage of a low knock-creating tendency and lower carbon emissions. In B20 Mahua Oil Methyl Ester (MOME)-acetylene dual-fuel Reactivity Controlled Compression Ignition (RCCI) engines, an effort has been made to use gaseous fuel acetylene as a Low Reactivity Fuel (LRF). RCCI engines are well known for their low particulate matter and Nitrogen Oxides (NOx). In the current study, all the above said technologies are concurrently used to attain better performance, emission and combustion characteristics. The test engine is properly modified to allow acetylene to be injected at an angle of 60° to stimulate better turbulence intake air at different flow rates, from 1 to 5 liters per minute (LPM). The result shows that the increase in acetylene mass flow rates increases the Brake Thermal Efficiency (BTE) to a certain threshold acetylene mass flow rate for B20 MOME. Maximum BTE of 32.6% is achieved at the RCCI B20 MOME-acetylene operation with acetylene flow rate of 4 LPM, which is marginally lower with Conventional Diesel Engine (CDE) operation. In B20 MOME- 4 LPM Acetylene RCCI operation the NOx emission, the smoke density, Hydro Carbon (HC) and Carbon Monoxide (CO) are reduced by 11.8%, 10.4%, 5.3% and 14.3% respectively when compared to B20 MOME in CDE operation.

10 September 2019 in International Journal of Ambient Energy
Verified
Journal Article
Closed access
MVManieniyan Veerasigamani
Manieniyan Veerasigamani
VSV. Sukumar
V. Sukumar
RSR. Senthilkumar
R. Senthilkumar
SSS. Sivaprakasam
S. Sivaprakasam
Internal combustion engines are important contributors to environmental and human health hazardous air pollution. This research work Reformed Exhaust Gas Recirculation (REGR) is very acutely focused on the viability of using B20MEOJAO (Methyl Ester of Jatropha with nano-additive of aluminium oxide) in diesel as a blend, and its performance, emission and combustion characteristics were evaluated. The energy balance analysis was carried in all the blends. As a result, the performance and emission were improved. The brake thermal efficiency is 3% higher in B20MEOJAO30ppm blend compared to REGR. The oxides of nitrogen emission reduced in 25% REGR B20MEOJAO30ppm blend compared to without REGR in diesel and B20MEOJAO30ppm. The lower NOx is lower in B20MEOJAO30ppm 20% REGR compared to diesel and other ratios. The B20MEOJAO30ppm blend energy utilisation is closer to diesel.

12 January 2021 in SN Applied Sciences
Verified
Journal Article
Open access
PDF file
MSM. Sonachalam
M. Sonachalam
MVManieniyan Veerasigamani
Manieniyan Veerasigamani
This study presents the optimization of the intake manifold and the optimized flow rate of the acetylene gas which acts as a low reactivity fuel to achieve the superior performance and emission characteristics used in the Reactivity controlled compression ignition (RCCI) engine. Intake manifold is one of the engine components which are an important factor in determining the quality of combustion. A very recent evolution of the RCCI engine using the low temperature combustion technique requires a low reactivity fuel which is injected through the secondary fuel injector. The secondary fuel injector must be designed and optimized to allow the acetylene gas to maximize the engine performance and the amount of acetylene gas in liters per minute required for better combustion. If the secondary fuel injector is mounted apart from the critical point, then the performance of the RCCI engine may be poor and also if the acetylene gas is not supplied properly, there is a risk of poor combustion and also if the acetylene gas is supplied excessively, there is a risk of knocking along with the backfire due to the excess fuel charge accumulation during the combustion process. Physical testing of the secondary fuel injector in the intake manifold with different angles, distance and flow rate of supply of acetylene gas is time and cost consuming process. To mitigate this issue optimization is done through computational fluid dynamics principles comes in handy to minimize time and money. In our study, ANSYS-FLUENT software is used for simulation purposes. Optimization of acetylene gas injector distance is carried out by analyzing the pressure contours at the entrance of the combustion chamber. The optimized flow rate of acetylene gas and the injector inclination is found by analyzing the flow contours of turbulent kinetic energy and turbulent dissipation rate.

26 August 2020 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Verified
Journal Article
Closed access
SMSonachalam Muthuswamy
Sonachalam Muthuswamy
MVManieniyan Veerasigamani
Manieniyan Veerasigamani
Many researchers utilized acetylene fuel in conventional diesel engine in dual fuel mode. Dual fuel Reactivity Controlled Compression Ignition (RCCI) engine is established by modifying the Conventional Diesel Engine (CDE) intake manifold that supplies secondary fuel through the injector. The aim of the study is to analyze the acetylene-bio diesel fueled RCCI engine by varying the secondary fuel injector position in the intake manifold. The experiment was carried out by acetylene gas as a Low Reactivity Fuel (LRF) which is supplied by an injector at a distance of 243.5 mm, 288.5 mm, and 333.5 mm from the intake valve with a constant flow rate of 4 l/min during the suction stroke. The High Reactivity Fuel (HRF) B20 MOME (Mahua Oil Methyl Ester) is supplied through the injector at end of the compression stroke. The modified engine was tested for its performance, combustion, and emission characteristics. The result shows that the Brake Thermal Efficiency (BTE) at a distance of 243.5 mm from the intake valve increases all loads and achieves a brake thermal efficiency improvement of 2.27% from the B20 MOME fueled engine. The Exhaust Gas Temperature (EGT) and NOx, which are predominantly higher in biodiesel fueled engine, are reduced about 13.5% and 13.6% respectively at a distance of 243.5 mm from the intake valve in the RCCI mode combustion.

26 February 2020 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Verified
Journal Article
Closed access
VVVelumani Veerabadran
Velumani Veerabadran
MVManieniyan Veerasigamani
Manieniyan Veerasigamani
SSSivaprakasam Shanmugam
Sivaprakasam Shanmugam
The demand for biodiesel oil or vegetable oil leads to the depletion of reserves of fossil fuel. Due to global political turmoil, this promoted an exponential hike in crude oil prices. Carbon nanotubes (CNTs) will build the proportion of carbon–oxygen in the biodiesel energizers by improving the burning execution of diesel–biodiesel mixes. CNT is absolutely a carbon substance developed fit as a fiddle with nanometer size and its scattering into the fuel will help as ignition impetus. The experiment is carried out to make an analysis of emission and to find out the effect on the performance by using exhaust gas recirculation (EGR), using biodiesel B20TCSAO with multiwalled carbon nanotube (MWCNT40ppm) and diesel with various EGR percentages (5%, 10%, 15%, and 20%) at different loads. The NOx value for MWCNT40ppmTCSAO was 1,023 ppm without EGR and 828 ppm at full load. The oxides of nitrogen are reduced by 20% using MWCNT with EGR compared to that without EGR. The performance of MWCNT increases by 5%.