This paper addresses the challenges associated with steering-angle control of electric power steering for autonomous vehicles, including steering model parameter uncertainty, dependency of self-aligning moment disturbance estimation on tire parameters, and compensation for the asymmetrical hysteresis behavior in the steering system caused by backlash in gears and static friction. A variable gain-sliding mode steering-angle controller is developed to deal with these challenges. Replacing the fixed gain with variable gain in the sliding mode controller solves two problems: it eliminates chattering, and it allows for automatic gain adjustment based on the maneuver and the size of the error, which eliminates the need for gain scheduling. Both fixed and variable gain-sliding mode controllers are derived and compared in simulations to prove the superiority of the variable gain controller. A sliding mode observer is developed to estimate the self-aligning moment disturbance without required information about the tire parameters, which makes it vehicle independent. The observer also treats the static friction as disturbance and estimates it along with any other disturbance, such as driver torque disturbance. The stability of both the controller and the observer is proven using Lyapunov stability theory. Simulation and experimental results proved the robustness of the presented methods to the above challenges.
Controlling autonomous vehicles to follow a desired lateral trajectory presents a significant challenge. Developers of lateral control systems often find it difficult to simultaneously bring both lateral error and heading angle error close to zero while smoothly following the curvature of the road. This paper introduces the design and development of a control strategy for lateral trajectory following using the backstepping control method, which successfully achieves the goal of stabilization and tracking. The controller comprises a backstepping feedback control law to regulate the errors and stabilize the vehicle by controlling the yaw rate, along with a dynamic feedforward component to compensate for road curvature and further eliminate steady-state errors on curved roads. The controller is built upon the dynamic bicycle model, enhanced by integrating the error dynamics into the state space equation, which allows for the inclusion of errors as state variables. The global uniform stability of the feedback control law is proven using Lyapunov stability theory and the LaSalle–Yoshizawa theorem. The stability and tracking performance of the controller are validated through simulation and experimental results obtained from a test vehicle on a public highway.
20 September 2022 in International Journal of Intelligent Transportation Systems Research