Lin Wang

Dr. Lin Wang


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 January 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ASAbdulhakim Shittu
Abdulhakim Shittu
Ali MehmanparastAli Mehmanparast
Ali Mehmanparast
LWLin Wang
Lin Wang
Konstantinos SalonitisKonstantinos Salonitis
Konstantinos Salonitis
AKAthanasios Kolios
Athanasios Kolios
Offshore wind turbines (OWTs) are deployed in harsh environments often characterized by highly stochastic loads and resistance properties, thus necessitating the need for structural reliability assessment (SRA) to account for such uncertainties systematically. In this work, the SRA of an OWT jacket-type support structure is conducted, applying two stochastic methods to predict the safety level of the structure considering various design constraints. The first method refers to a commercial finite element analysis (FEA) package (DesignXplorer© from ANSYS) which employs direct simulations and the six sigma analysis function applying Latin hypercube sampling (LHS) to predict the probability of failure. The second method develops a non-intrusive formulation which maps the response of the structure through a finite number of simulations to develop a response surface, and then employs first-order reliability methods (FORM) to evaluate the reliability index and, subsequently, the probability of failure. In this analysis, five design constraints were considered: stress, fatigue, deformation, buckling, and vibration. The two methods were applied to a baseline 10-MW OWT jacket-type support structure to identify critical components. The results revealed that, for the inherent stochastic conditions, the structural components can safely withstand such conditions, as the reliability index values were found acceptable when compared with allowable values from design standards. The reliability assessment results revealed that the fatigue performance is the design-driving criterion for structural components of OWT support structures. While there was good agreement in the safety index values predicted by both methods, a limitation of the direct simulation method is in its requirement for a prohibitively large number of simulations to estimate the very low probabilities of failure in the deformation and buckling constraint cases. This limitation can be overcome through the non-intrusive formulation presented in this work.

8 March 2022 in Wind
Verified
Journal Article
Open access
PDF file
SKSiddharth Suhas Kulkarni
Siddharth Suhas Kulkarni
LWLin Wang
Lin Wang
DVDemetrios Venetsanos
Demetrios Venetsanos
The use of fossil fuels to generate energy is often associated with serious negative effects on the environment. The greenhouse gas emissions resulting from burning these fuels destroy the ozone layer and lead to global warming. As a strategic approach to the solution of this problem, calls for research and development, as well as the implementation of technologies associated with renewable energy sources within the European Union (EU), have intensified in recent years. One of the keys to a successful outcome from this intensified effort is to identify the challenges associated with the transfer of both intellectual property and technology rights in the renewable energy sector within the EU. The present paper contributes towards this direction. Firstly, data from the literature were used to identify contemporary trends within the European Union with regards to technology transfer and intellectual property within the sector of renewable energy. Then, a statistical analysis utilising an ordinary least squares (OLS) model was conducted to establish a correlation between renewable energy innovations (research and development) and the level of investment associated with renewable energy technologies. Finally, this correlation, along with the associated challenges, was then critically explored for four of the most popular renewable energy sources (namely solar energy, biomass, wind energy, and marine renewable energy), and conclusions are reported.

15 July 2021 in International Journal of Sustainable Energy
Verified
Journal Article
Open access
SAShaikha Al-Sanad
Shaikha Al-Sanad
JPJafarali Parol
Jafarali Parol
LWLin Wang
Lin Wang
AKAthanasios Kolios
Athanasios Kolios
An optimum design of the onshore wind turbine (WT) tower structure is crucial for achieving an economic, efficient and safe design of the entire onshore WT system. In this study, an integrated structural optimisation framework for onshore WT towers is established through combining a parametric finite element analysis (FEA) model with a genetic algorithm (GA). The bottom and top diameters as well as the thickness distribution of the onshore WT tower are considered as design variables. The mass of the onshore WT tower is minimised by the structural optimisation framework under multiple design constraints. The framework has been validated and then applied to the structural optimisation of a representative 2.0 MW onshore WT tower presently installed in a wind farm in Middle East. It is demonstrated that the structural optimisation framework developed in this work can considerably lower the mass of the tower while fulfilling design requirements.

Verified
Journal Article
Open access
PDF file
FGFan Gao
Fan Gao
LWLin Wang
Lin Wang
Baran YeterBaran Yeter
Baran Yeter
AKAthanasios Kolios
Athanasios Kolios
The present study aims to conduct a comprehensive comparative analysis of international standards (DNV, ABS, BV, etc.) that regulate the design of mooring systems for floating offshore wind turbines. The comparative analysis focuses on the safety factors applied to the line tension of mooring systems. Firstly, an extensive literature review of the most-used floating platforms in the offshore wind industry and their corresponding mooring configurations is presented. Afterwards, a case study is presented using the VolturnUS floating substructure as a reference for analyzing the coupled dynamic response of mooring analysis through OrcaFlex 11.4, where the numerical model used for the coupled dynamic response of moorings is validated by benchmarking against the OC3 Hywind platform model. Within the scope of the comparative analysis, all-chain and semi-taut hybrid systems under various operational and survival load conditions are considered. The results demonstrate the similarities and discrepancies in line tension utilization among the standards, highlighting the comparative conservatism in different environmental conditions. Furthermore, the study underscores the need for tailored safety factors in mooring designs, given the variability in assessment methods across design guidelines, thereby making the design more flexible and encouraging innovative mooring system solutions.

19 December 2024
Verified
Book Chapter
Open access
PDF file
LWLin Wang
Lin Wang
AKAthanasios Kolios
Athanasios Kolios
The support structure is a critical component of the wind turbine system, significantly influencing the overall performance and efficiency of the turbine, especially in offshore environments. This chapter focuses on the design optimisation of offshore wind turbine (OWT) support structures. It covers structural modelling, which is foundational in predicting how structures behave under various load conditions. It also includes discussions on design load cases and limit states, which are crucial for ensuring the structure’s safety and functionality in harsh marine environments. Additionally, it explores optimisation algorithms, for example, the genetic algorithm (GA), which can effectively search for optimal solutions. A case study on the design optimisation of a typical OWT support structure is also presented, illustrating the application of these principles.