Deep eutectic solvents (DESs), a novel and environmentally-friendly solvent, have high potential for biomass pretreatment due to its advantages of low cost, low toxicity, strong solubility, excellent selectivity and biocompatibility. Two types of DES (binary and ternary) were synthesized and characterized, and optimized ternary DES was selected to pretreat wheat straw for enhancement of the solubility of lignocellulose. Moreover, enzymatic hydrolysis was tested to verify the performance of pretreatment. In addition, the changes in surface morphology, structure and crystallinity of wheat straw pretreated by DES were analyzed to reveal the pretreatment mechanism. Experimental results indicated that viscosity exhibited little difference in different types of DESs, and a declining trend as the temperature increases in same DES. The ternary DES pretreatment efficiently enhanced the solubility of typical lignocellulose, with the optimal removal rate of lignin at approximately 69.46%. Furthermore, the total sugar concentration of the residue was about 5.1 times more than that of untreated wheat straw after the pretreated samples were hydrolyzed by the cellulase for 24 h, indicating that DES has the unique ability to selectively extract lignin and hemicellulose from wheat straw while retaining cellulose, and thus enhanced the solubility of lignocellulose. The scanning electron microscope (SEM) observation and X-ray diffraction (XRD) determination showed that the surface of wheat straw suffered from serious erosion and the crystallinity index of wheat straw increased after DES5 pretreatment. Therefore, DES cleaves the covalent bond between lignin and cellulose and hemicellulose, and reduces the intractability of lignin resulting in the lignin dissolution. It suggests that DES can be used as a promising and biocompatible pretreatment way for the cost-effective conversion of lignocellulose biomass into biofuels.

Widespread antibiotic residues in aquatic environments pose escalating threats to ecological stability and human health, highlighting the urgent demand for effective remediation strategies. In recent years, photocatalytic technology based on advanced nanomaterials has emerged as a sustainable and efficient strategy for antibiotic degradation, enabling the effective utilization of solar energy for environmental remediation. This review provides an in-depth discussion of six representative categories of photocatalytic nanomaterials that have demonstrated remarkable performance in antibiotic degradation, including metal oxide-based systems with defect engineering and hollow architectures, bismuth-based semiconductors with narrow band gaps and heterojunction designs, silver-based plasmonic composites with enhanced light harvesting, metal–organic frameworks (MOFs) featuring tunable porosity and hybrid interfaces, carbon-based materials such as g-C₃N₄ and biochar that facilitate charge transfer and adsorption, and emerging MXene–semiconductor hybrids exhibiting exceptional conductivity and interfacial activity. The photocatalytic performance of these nanomaterials is compared in terms of degradation efficiency, recyclability, and visible-light response to evaluate their suitability for antibiotic degradation. Beyond parent compound removal, we emphasize transformation products, mineralization, and post-treatment toxicity evolution as critical metrics for assessing true detoxification and environmental risk. In addition, the incorporation of artificial intelligence into photocatalyst design, mechanistic modeling, and process optimization is highlighted as a promising direction for accelerating material innovation and advancing toward scalable, safe, and sustainable photocatalytic applications.

The widespread implementation of municipal wastewater treatment and reuse must first ensure the safety of reused wastewater. The effluent of the municipal wastewater treatment plant contains a large amount of dissolved organic matter (DOM), which adversely affects the reuse of wastewater. In this study, the ultrafiltration (UF) + reverse osmosis (RO) process was used to treat the secondary effluent from wastewater treatment plants. The relationship between the removal performance, membrane fouling of the UF + RO process, and DOM removal characteristics of influent were studied. The results show that DOM can be removed effectively by UF + RO process. The UF mainly removes DOM with a molecular weight greater than 10 kDa, while RO has a significant removal effect on low-molecular-weight DOM, which mainly causes UF and RO membrane fouling. The UF + RO process has a significant removal rate on fulvic acid, humic acid, tyrosine, and tryptophan, and the order is humic acid > fulvic acid > tyrosine > tryptophan. Fulvic acid contributed the most to the UF membrane fouling, while fulvic acid and protein-like proteins contributed mainly to the RO membrane fouling.