The quest for eco-friendly synthetic routes that can be used for the development of multifunctional materials, in particular for water treatment, has reinforced the use of plant extracts as replacement solvents in their use as reducing and capping agents during the synthesis of green derived materials. Amongst the various nanoparticles, Zinc Oxide (ZnO) has emerged as one of the preferred candidates for photocatalysis due to its optical properties. Moreover, ZnO has also been reported to possess antimicrobial properties against various bacterial strains such as E. coli and S. aureus. In this review, various types of pollutants including organic dyes and natural pollutants are discussed. The treatment methods that are used to purify wastewater with their limitations are highlighted. The distinguishing properties of ZnO are clearly outlined and defined, not to mention the performance of ZnO as a green derived photocatalyst and an antimicrobial agent, as well. Lastly, an overview is given of the challenges and possible further perspectives.
Pollutants such as dyes and pharmaceuticals have become a problem in the environment, thus there is a need to find multifunctional materials that are safe and can be used for the removal of various pollutants. In this study, we report on the synthesis of Zinc sulphide (ZnS) nanostructures and their use as photocatalysts for the degradation of dyes and various antibiotics. Fourier transform infrared spectroscopy (FTIR) confirmed the functional groups found in plants and these were linked to the biomolecules identified through Liquid chromatography-mass spectrometry (LCMS). Ultraviolet-visible spectroscopy (UV–vis) and x-ray diffraction (XRD) confirmed the formation of the ZnS nanostructures. Thermal Gravimetric Analysis (TGA) and Brunner Emmet Teller (BET) confirmed the material was thermally stable up until 480 °C and mesoporous in nature, respectively. Scanning electron microscope (SEM) and transmission electron microscope (TEM) showed that the material is spherical in shape and energy dispersive spectroscopy (EDS) further corroborated their formation. From the degradation analysis, 90% of the malachite green (MG) dye could be degraded in 60 min at optimum conditions (pH 6, 25 mg and 10 mg l−1) and the holes were responsible for the degradation. Lastly, when tested against antibiotics, the ZnS material managed to degrade both the sulfisoxazole (SSX) and sulfamethoxazole (SMX). These results showed that the ZnS nanoparticles could be used as a multifunctional material for the degradation of various pollutants.
The quest for eco-friendly synthetic routes that can be used for the development of multifunctional materials, in particular for water treatment, has reinforced the use of plant extracts as replacement solvents. In this study, bimetallic ZnOSnO2 nanoparticles of different ratios were synthesized using the Sutherlandia frutescens (S. frutescens) plant and tested for the degradation of methylene blue dye and the antibiotics sulfisoxazole and sulfamethoxazole. From the analysis, FTIR confirmed the formation of bimetallic nanoparticles in all ratios within the fingerprint region. SEM revealed homogenous and heterostructures of tubular and spherical structures, with the size distribution ranging from 5–60 nm, respectively. XRD confirmed the formation and the crystallinity of the bimetallic nanoparticles, UV-Vis confirmed the optical properties of the materials and the bandgap values were found between 3.08 and 3.3 eV. From the surface area analysis, type III isotherm and mesoporous structures were confirmed. The photocatalytic activity of these ratios was investigated against MB dye and the antibiotics SSX and SMX. The highest degradation of 88% for MB was obtained using the 50:50 loading ratio at 150 min with a fast kinetic rate of 0.0008 min−1. Furthermore, the holes were the species found to be responsible for the degradation of MB. The SSX and SMX antibiotics exhibited a 66% and 70% degradation, respectively. From this analysis, it can be noted that it is possible to synthesize environmentally safe materials that can be used to degrade various pollutants in our water streams.
Water contamination from textile dyes is a major environmental hazard. This is due to the textile industry serving among the biggest manufacturers, thus the extensive usage of these dyes. Several methods for the treatment of these pollutants have been used; however, they have limitations in terms of cost, forming secondary pollution, and effectiveness. Metal oxides such as tin oxide (SnO2) have been identified as potential photocatalysts for the degradation of these dyes. The potential of SnO2-based photocatalysts, especially those made using green techniques, has been at the forefront of current research. The physical and optical properties, green synthesis techniques, and photocatalytic uses of SnO2 NPs are examined. Furthermore, methods to improve photocatalytic effectiveness through the formation of heterostructures are also explored. Lastly, the conclusion and future perspectives of these materials as suitable candidates for water treatment are highlighted.
Water contamination with pharmaceuticals is a global challenge that affects both aquatic and human life. The presence of these pharmaceuticals has increased in recent years due to their high demand. In this study, varying compositions of Cu-NiO nanocomposites were synthesized using Sutherlandia frutescens plant extracts. The synthesized nanoparticles were characterized using UV–vis, FTIR, XRD, SEM, EDS and TGA. The photocatalytic activity of these materials was tested on SMX and CIP antibiotics. Furthermore, their antibacterial efficiency against Gram-negative and Gram-positive bacterial strains was investigated. XRD, through phase identification and SEM/EDS, confirmed the formation of nanocomposites with elements of Cu, O and Ni. The 15% CuNiO nanocomposite demonstrated the highest thermal stability with a minimal weight loss of 3%. The 15% CuNiO had the highest degradation efficiencies of 92% and 85% for SMX and CIP, respectively. The catalyst could be reusable for up to three trials with a 65% efficiency against CIP, while the photogenerated electrons (e−) were the most reactive species for the degradation of pharmaceuticals. Lastly, these materials were noted to have antibacterial efficiency against both Gram-negative and -positive strains, with the highest zone of inhibition against E. coli. This study has shown that novel green nanocomposites from S. frutescence can be used for targeting multiple pollutants simultaneously by degrading antibiotics efficiently and removing various bacterial strains.
About Me
An upcoming researcher in material sciences who have a passion for research
An upcoming researcher in material sciences who have a passion for research