Lignin, a valuable polymer of natural origin, displays numerous desired intrinsic properties; however, modification processes leading to the value-added products suitable for composite materials’ applications are in demand. Chemical modification routes involve mostly reactions with hydroxyl groups present in the structure of lignin, but other paths, such as copolymerization or grafting, are also utilized. On the other hand, physical techniques, such as irradiation, freeze-drying, and sorption, to enhance the surface properties of lignin and the resulting composite materials, are developed. Various kinds of chemically or physically modified lignin are discussed in this review and their effects on the properties of polymeric (bio)materials are presented. Lignin-induced enhancements in green polymer composites, such as better dimensional stability, improved hydrophobicity, and improved mechanical properties, along with biocompatibility and non-cytotoxicity, have been presented. This review addresses the challenges connected with the efficient modification of lignin, which depends on polymer origin and the modification conditions. Finally, future outlooks on modified lignins as useful materials on their own and as prospective biofillers for environmentally friendly polymeric materials are presented.
Lignin is an abundantly occurring aromatic biopolymer that receives increasing attention as, e.g., a biofiller in polymer composites. Though its structure depends on the plant source, it is a valuable component showing biodegradability, antioxidant, and ultra-violet (UV) absorption properties. Lignosulfonates, a by-product of the paper and pulping industries formed as a result of the implementation of the sulfite process, have been used in the presented study as a raw material to obtain a sulfonamide derivative of lignin. Hereby, a two-step modification procedure is described. The obtained materials were investigated by means of FTIR, WAXD, SS-NMR, SEM, and TGA; the results of spectroscopic investigations confirm the formation of a sulfonamide derivative of lignin via the proposed modification method. The obtained modified lignin materials showed significantly improved thermal stability in comparison with the raw material. The internal structure of the lignosulfonate was not altered during the modification process, with only slight changes of the morphology, as confirmed by the WAXD and SEM analyses. The manufactured sulfonamide lignin derivatives show great promise in the potential application as an antibacterial filler in advanced biopolymeric composites.
Nowadays, increasing attention is devoted to the search for polymeric composite materials that are characterized by reduced flammability. In this work, the layer-by-layer (LbL) technique was applied to form multilayered protective coatings for polyamide 6/montmorillonite (PA6/MMT) hybrid nanocomposites. This time, the double layers LbL deposition was used in order to improve the thermal properties or flammability of PA6 materials. Our goal was to check how five, 10, and 15 triple-layer deposition onto the surface of PA6 and PA6/MMT composites influenced these relevant properties. For this reason, disodium H-phosphonate, sodium montmorillonite, and iodo-bis(triphenylphosphino)copper were used for polyelectrolyte solution preparation. It was found that the LbL method could be successfully used to improve the flammability characteristics of polyamide 6-based composites. Nevertheless, the deposition of the copper complex should be combined with other flame retardants—preferentially containing phosphorus—which enable synergistic effects to occur. Moreover, microscopic observations confirmed that the surfaces on which the formation of interwoven fibrous crystal structures was observed had a tendency to protect the entire material against the destructive effects of heat, contributing, among other things, to reduce the maximum point of heat release rate (PHRR).
Lignin, a highly aromatic macromolecule building plant cells, and cellulose are two of the most commonly occurring natural polymers. Lignosulfonate is a grade of technical lignin, obtained as a by-product in the paper and wood pulping industries, a result of the used lignin isolation method, i.e., sulfite process. In this work, sodium lignosulfonate is used as a starting material to manufacture sulfonamide derivatives of lignin in a two-step modification procedure. Since this direction of the lignin modification is rather rarely investigated and discussed, it makes a good starting point to expand the state of knowledge and explore the properties of lignosulfonamides. Materials obtained after modification underwent characterization by FTIR, SS-NMR, WAXD, SEM, and TGA. Spectroscopic measurements confirmed the incorporation of dihexylamine into the lignin structure and the formation of lignosulfonamide. The crystalline structure of the material was not affected by the modification procedure, as evidenced by the WAXD, with only minute morphological changes of the surface visible on the SEM imaging. The obtained materials were characterized by improved parameters of thermal stability in relation to the raw material. As-prepared sulfonamide lignin derivatives with a potential application as a filler in biopolymeric composites may become a new class of functional, value-added, sustainable additives.