Very few studies have focused on diatomaceous earth slopes along high-speed railways, and the special properties of diatomaceous earth under alternating dry and wet conditions are unknown. This paper studies diatomaceous earth in the Shengzhou area, through which the newly built Hangzhou–Taizhou high-speed railway passes, and the basic physical and hydraulic properties of diatomaceous earth are analyzed by indoor test methods. A convenient, efficient, and controllable high-speed railway slope artificial rainfall simulation system is designed, and in situ comprehensive monitoring and fissure observation are performed on site to analyze the changes in various diatomaceous soil slope parameters under rainfall infiltration, and to explore the cracking mechanisms of diatomaceous earth under alternating dry and wet conditions. The results indicate extremely poor hydrophysical properties of diatomaceous earth in the Shengzhou area; the disintegration resistance index values of natural diatomaceous earth samples subjected to dry and wet cycles are 1.8–5.6%, and the disintegration is strong. Comprehensive indoor tests and water content monitoring show that natural diatomaceous earth has no obvious influence when it contacts water, but it disintegrates and cracks under alternating dry and wet conditions. The horizontal displacement of both slope types mainly occurs within 0.75–2.75 m of the surface layer, indicating shallow surface sliding; after testing, natural slope crack widths of diatomaceous earth reach 10–25 mm, and their depths reach 40–60 cm. To guarantee safety during high-speed railway engineering construction, implementing proper protection for diatomaceous earth slopes is recommended.

This study proposes a new waterproof sealing layer to reduce the impact of water on subgrade beds. The proposed waterproof sealing layer is composed of a polyurethane adhesive (PA) mixture, which aims to control interlaminar deformation and prevent seepage. A variety of laboratory tests were first performed to analyze the attenuation characteristics and mechanical properties of various polyurethane polymer (PP)-improved gravel mixtures under thermohydraulic coupling effects. In addition, a waterproof performance model test of the PP-improved gravel layer was conducted to investigate its waterproof and drainage performance and hydraulic damage mechanism. Finally, the feasibility and effectiveness of the surface structure of the waterproof drainage subgrade bed containing the PA mixture was tested in combination with the treatment project of the Ciyaowan station of the Baoshen heavy-haul railway. According to the experimental and model results, (1) the waterproof layer containing the polyurethane mixture exhibited satisfactory stiffness, elasticity and flexibility. The waterproof layer containing the polyurethane mixture also controlled the deformation between layers, and its mechanical properties remained stable. (2) The waterproof layer with the dense polyurethane mixture performed well in terms of the waterproof aspect, and no infiltration occurred under cyclic load (3). Long-term field monitoring revealed that the effect of the implementation of a PP-improved gravel layer to treat mud pumping was remarkable. The settlement of the PP-improved gravel layer only reached 13.21 mm, and the settlement remained stable in the later stage.