This paper presents a model predictive control (MPC)-based algorithm for rollover prevention of an autonomous electric road sweeper (AERS). For AERS, the basic function of autonomous driving is a path- and velocity-tracking control needed to make a vehicle follow given path and velocity profiles. On the other, the AERS adopts an articulated frame steering (AFS) mechanism which can make cornering behavior agile. Moreover, the tread of the AERS is narrow, and the height of the mass center is high. As a result, it is prone to roll over. For this reason, it is necessary to design a controller for path and velocity tracking and rollover prevention in order to improve maneuverability and roll safety of the AERS. A kinematic model was adopted as a vehicle one for the AERS. With the vehicle model, reference states of position and velocity were determined that are needed to make the AERS track the reference path and prevent rollover. With the vehicle model and reference states, an MPC-based motion controller was designed to optimize articulation angle and velocity commands. The load-transfer ratio (LTR) was used to measure a rollover propensity. To evaluate the proposed algorithm, a simulation was conducted for the U-turn scenario. Simulation results show that the proposed algorithm improves path tracking and prevents the rollover of the AERS.

In recent years, autonomous mobile platforms have seen an increase in usage in several applications. One of which is street-sweeping. Although street-sweeping is a necessary process due to health and cleanliness, fleet operations are difficult to plan optimally. Since each vehicle has several constraints (battery, debris, and water), path planning becomes increasingly difficult to perform manually. Additionally, in real-world applications vehicles may become inactive due to a breakdown, which requires real-time scheduling technology to update the paths for the remaining vehicles. In this paper, the fleet street-sweeping problem can be solved using the proposed lower-level and higher-level path generation methods. For the lower level, a Smart Selective Navigator algorithm is proposed, and a modified genetic algorithm is used for the higher-level path planning. A case study was presented for Uchi Park, South Korea, where the proposed methodology was validated. Specifically, results generated from the ideal scenario (all vehicles operating) were compared to the breakdown scenario, where little to no difference in the overall statistics was observed. Additionally, the lower-level path generation could yield solutions with over 94% area coverage.

As autonomous tractors become more common crop harvesting applications, the need to optimize the global servicing path becomes crucial for maximizing efficiency and crop yield. In recent years, several methods of path generation have been researched, but very few have studied their applications on complex field shapes. In this study, a method of creating the optimal servicing path for simple and complex field shapes is proposed. The proposed algorithm creates subfields for a target land, optimizes the track direction for several subfields individually, merges subfields that result in overall increased efficiency, and finds the minimum non-operating paths to travel from subfield to subfield while selecting the respective optimal subfield starting locations. Additionally, it is required that this process must be done within 3 seconds to meet performance requirements. Results from 3 separate field shapes show that the field traversal efficiency can range from 68.0% to 94.4%, and the coverage ratio can range from 98.8% to 99.9% for several different conditions. In comparison with previous studies using the same field shape, the proposed methods demonstrate an increase of 5.5% in field traversal efficiency.

This paper presents a method to prevent the rollover of autonomous electric road sweepers (AERS). AERS have an articulated frame steering (AFS) mechanism. Moreover, the heights of the center of gravity of the front and rear bodies are high. As such, they are prone to rolling over at low speeds and at small articulation angles. A bicycle model with a nonlinear tire model was used as a vehicle model for AERS. Using that vehicle model, path tracking and speed controllers were designed in order to follow a predefined path and speed profile, respectively. To check the rollover propensity of AERS, load transfer ratio (LTR) based the rollover analysis was completed. Based on the results of the analysis, a rollover prevention scheme was proposed. To validate the proposed scheme, a simulation was conducted using a U-shaped path under constant speed conditions. From the simulation, it was shown that the proposed scheme is effective in preventing AERS from rolling over.

Autonomous vehicle path-tracking and lateral stability depend critically on reliable steering actuator operation. However, steering systems are susceptible to bias faults from mechanical misalignment, friction, drivetrain asymmetry, and degradation. These faults distort commanded versus actual steering inputs, causing accumulated lateral and heading errors during high-speed driving. Actuator biases manifest as constant offsets, gradual drift, or intermittent activations, which complicate reliable diagnosis. This study presents an adaptive sliding mode observer-based active fault-tolerant control framework for real-time detection, estimation, and mitigation. An extended four-state lateral error model incorporating distance and heading errors captures the influence of steering bias on vehicle behavior and stability. Adaptive observer gain tuning addresses modeling uncertainties arising from speed variations, linearization residuals, and tire stiffness changes to ensure robust estimation under realistic driving conditions. The effectiveness of the proposed method is validated through high-speed double lane change simulations considering three representative bias scenarios: an initial constant bias, a gradually increasing drift bias, and an intermittent bias. Results demonstrate reliable bias estimation and significantly improved path-tracking accuracy compared to uncompensated cases. Operating without additional sensors, hardware redundancies, or controller switching, the framework is suitable for practical implementation in autonomous vehicle steering systems.

This study proposes a path-tracking algorithm based on feed-forward (preview distance control) and feedback (LQR, linear quadratic regulator) controllers to reduce heading angle errors and lateral distance errors between a predefined path and an autonomous vehicle. The main objective of path-tracking is to generate control commands to follow a predefined path. The feed-forward control is applied to solve heading angle errors and lateral distance errors in the trajectory caused by curvatures of the road by controlling the steering angle of the vehicle. An LQR was applied to decrease the errors caused by environmental and external disturbances. The proposed algorithm was verified by simulating the driving environment of an autonomous vehicle using a CARLA simulator. Safety and comfort were demonstrated using the test vehicle. The study also demonstrated that the tracking performance of the proposed algorithm exceeded that of other path-tracking algorithms, such as Pure Pursuit and the Stanley Method.