In this work, the micro-arc oxidation method is used to fabricate surface-modified complex-structured titanium implant coatings to improve biocompatibility. Depending on the utilized electrolyte solution and micro-arc oxidation process parameters, three different types of coatings (one of them—oxide, another two—calcium phosphates) were obtained, differing in their coating thickness, crystallite phase composition and, thus, with a significantly different biocompatibility. An analytical approach based on X-ray computed tomography utilizing software-aided coating recognition is employed in this work to reveal their structural uniformity. Electrochemical studies prove that the coatings exhibit varying levels of corrosion protection. In vitro and in vivo experiments of the three different micro-arc oxidation coatings prove high biocompatibility towards adult stem cells (investigation of cell adhesion, proliferation and osteogenic differentiation), as well as in vivo biocompatibility (including histological analysis). These results demonstrate superior biological properties compared to unmodified titanium surfaces. The ratio of calcium and phosphorus in coatings, as well as their phase composition, have a great influence on the biological response of the coatings.

Colloidal micromotors are important candidates for a wide spectrum of applications, ranging from medicine to environmental remediation. Thus far, the propulsion force determination has been obtained from the colloidal motor motion speed and surrounding viscosity via the Stokes drag. Herein, a precise force measurement method and detailed analysis of the fundamental propulsion mechanisms of colloidal Janus micromotors propelled by thermophoretic and steam bubble force vectors, revealing findings uninvestigated to date, are presented. Optical tweezers provide fast and high‐precision force measurements in all three orthogonal dimensions simultaneously. Colloidal Janus micromotors are compared with isotropic hot Brownian reference microparticles, which have no defined force vector that propels them perpendicular to the direction of the laser beam. Janus micromotors display a defined laser power intensity‐dependent thermophoretic propulsion, as well as bubble force‐based propulsion, after surpassing the threshold value for the water boiling. The steam bubble propulsion force vector and the thermophorethic force vectors sum up for the Janus micromotor propulsion direction. On the contrary, the bubble force counteracts photophoretic force in propagation direction of light. Moreover, the thermal‐based reduction of viscosity around the Janus colloidal motor contributes significantly to its speed and guidance abilities.

A promising method for improving the functional properties of calcium-phosphate coatings is the incorporation of various antibacterial additives into their structure. The microbial contamination of a superficial wound is inevitable, even if the rules of asepsis and antisepsis are optimally applied. One of the main problems is that bacteria often become resistant to antibiotics over time. However, this does not apply to certain elements, chemical compounds and drugs with antimicrobial properties. In this study, the fabrication and properties of zinc-containing calcium-phosphate coatings that were formed via micro-arc oxidation from three different electrolyte solutions are investigated. The first electrolyte is based on calcium oxide, the second on hydroxyapatite and the third on calcium acetate. By adding zinc oxide to the three electrolyte solutions, antibacterial properties of the coatings are achieved. Although the same amount of zinc oxide has been added to each electrolyte solution, the zinc concentration in the coatings obtained vary greatly. Furthermore, this study investigates the morphology, structure and chemical composition of the coatings. The antibacterial properties of the zinc-containing coatings were tested toward three strains of bacteria—Staphylococcus aureus, methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa. Coatings of calcium acetate and zinc oxide contained the highest amount of zinc and displayed the highest zinc release. Moreover, coatings containing hydroxyapatite and zinc oxide show the highest antibacterial activity toward Pseudomonas aeruginosa, and coatings containing calcium acetate and zinc oxide show the highest antibacterial activities toward Staphylococcus aureus and methicillin-resistant Staphylococcus aureus.