Kerb is an integral part of road infrastructure and performs several important functions, including providing stability to the edges of the road and providing effective drainage. Their performance can significantly influence the behaviour and service life of a road. The design conditions, construction materials and their sustainability can be important to assess from an asset management and sustainable construction point of view even though this area has been paid limited research attention in the past. This paper reviews the available literature on the design and construction considerations for kerbs and critically analyses them with a special focus on sustainable construction practice. The different materials commonly used around the world for the construction of kerb in terms of their properties, failure and available design guidelines have been discussed along with their management practice. Special situations, such as expansive soil movement and tree root-related problems, have also been considered, and the current guidelines for designing in such situations have also been discussed. A carbon footprint and sustainability analysis has been conducted on the current practice of using natural aggregate concrete and compared against several potential alternatives. The review of the design process indicated that the current practice relies on over-simplified design procedures and identified scopes for improvement, especially with the incorporation of mechanical behaviour of the material being used in construction. The carbon footprint and sustainability analysis indicated that the use of alternative materials could result in significant savings in the kerb construction industry’s carbon footprint.

In recent years, there has been a notable emphasis on waste reduction and the adoption of recycled materials within the construction industry to reduce the industry’s overall carbon footprint. This study investigates the structural performances of concrete kerb sections prepared with five different concrete mixes containing recycled concrete aggregate, recycled tyre-derived aggregates and recycled polypropylene fibres. Kerb sections were cast at a road site in a suburb of Adelaide, Australia. After the concrete hardened, sections were cut and brought to the laboratory. A large number of monotonic and cyclic load tests were conducted on the kerb sections. The load-carrying capacity, bending moment capacity, cyclic fatigue capacity, durability properties along with deformation tolerance were evaluated. Kerb sections made with concrete containing recycled aggregate and polypropylene fibre could sustain nearly 2000 cycles of loading. Kerb sections prepared with natural aggregate concrete performed comparatively better. The addition of polypropylene fibre significantly improved the post-cracking behaviour of kerb sections and can delay crack propagation and other distress when subjected to cyclic loadings such as excessive soil movement, e.g., in areas with expansive soils or prone to tree root migration. Long-term observation may be required to confirm the mechanical and durability performance improvement in real field conditions.