On 22 June 2017, an extreme warm-sector rainfall event hit the western coastal area of South China, with maximum hourly and 12-h rainfall accumulations of 189.4 and 464.8 mm, respectively, which broke local historical records. Multisource observations were used to reveal multiscale processes contributing to the extreme rainfall. The results showed that a marine boundary layer jet (BLJ) coupled with a synoptic low-level jet (LLJ) inland played an important role in the formation of an extremely humid environment with a very low lifting condensation level of near-surface air. Under the favorable pre-convective conditions, convection was initialized at a mesoscale convergence line, aided by topographic lifting in the evening. During the nocturnal hours, the rainstorm developed and was maintained by a quasi-stationary mesoscale outflow boundary, which continuously lifted warm, moist air transported by the enhanced BLJ. When producing the extreme rainfall rates, the storm possessed relatively weak convection, with the 40 dBZ echo top hardly reaching 6 km. The extreme rainfall was produced mainly by the warm rain microphysical processes, mainly because the humid environment and the deep warm cloud layer facilitated the clouds’ condensational growth and collision–coalescence, and also reduced rain evaporation. As the storm evolved, the raindrop concentration increased rapidly from its initial stage and remained high until its weakening stage, but the mean raindrop size changed little. The extreme rain was characterized by the highest concentration of raindrops during the storm’s lifetime with a mean size of raindrops slightly larger than the maritime regime.

The microphysical characteristics of tropical cyclones vary in different rain regions, which affects not only the dynamic and thermodynamic mechanisms of the typhoon system but also the development of tropical cyclones. This study analyzed the raindrop size distribution (DSD) and the gamma DSD parameters associated with Typhoon Mangkhut using three two-dimensional (2D) video disdrometers from the Longmen Field Experiment Base for Cloud Physics, China Meteorological Administration in Guangdong, China during 16–17 September 2018. According to the observed track and radar reflectivity, this process can be divided into three distinct segments: the outer rainband before landfall (S1), the inner core (S2), and the outer rainband after landfall (S3). The outer rainband mainly produces stratiform rains, while the inner core mainly produces convective rains. The temporal and spatial variations in the rain rate, radar reflectivity, and DSD parameters of the different segments were analyzed and compared at three sites. Although the DSD characteristics are distinctly different in the three segments, the DSD characteristics of the same segment were similar at different sites. In the inner core (S2), the precipitation contains smaller drops (around 0.5 mm) and the concentrations are higher within each size bin compared with those of the other segments, resulting in the maximum rain rate (11.66 mm h⁻¹), radar reflectivity (34.53 dBZ), liquid water content (0.65 g m⁻³), and number concentration (4.12 mm⁻¹ m⁻³ on a logarithmic scale) occurring in this segment. The N_w–D_m scatter pairs have maritime-like convection, which increases outward from the inner core (S2). The relationship between the shape (μ) and slope (Λ) was also investigated. The microphysical characteristics determined in this study provide useful information for understanding microphysical precipitation processes and for improving the precision of numerical weather prediction models.

The capability to estimate monsoon rainfall is investigated by using S-band polarimetric radar (S-POL) and two-dimensional Video Disdrometer (2DVD) during 2017–2018 in South China. Based on 2 years of 2DVD raindrop size distribution (DSD) observations of monsoon precipitation systems, four different quantitative precipitation estimation (QPE) algorithms were obtained, including R(Z_H), R(Z_H, Z_DR), R(K_DP), and R(K_DP, Z_DR). In order to clearly demarcate the optimal ranges of the four QPE algorithms by considering the impact of the monsoon precipitation system of South China, the optimal ranges of the four QPE algorithms were integrated together according to the characteristics of different QPE algorithms in the reflectivity-differential reflectivity (Z_H-Z_DR) space distribution by reference to 8 monsoon rainfall events from 2016 to 2020 observed in Guangzhou and Yangjiang S-POL. Then, an optimal algorithm was proposed for the quantitative estimation of monsoon precipitation in South China (2DVD-SCM) using S-POL. The 2DVD-SCM was tested by comparing it with a traditional radar QPE algorithm PPS (WSR-88D Precipitation Processing System); a classical QPE algorithm CSU-HIDRO (Colorado State University-Hydrometeor Identification Rainfall Optimization) for the polarimetric radar; a piecewise fitting algorithm LPA-PFM (Piecewise Fitting Method) based on laser raindrop spectrum. The rainfall event one-by-one test results show that the 2DVD-SCM algorithm performs obviously better than the other three algorithms in most of the rainfall events. The hourly accumulated rainfalls estimated by the 2DVD-SCM algorithm are agreed well with rain gauge observations. The normalized errors (NE) and the root mean square errors (RMSE) values of 2DVD-SCM are remarkably less than the other three algorithms, and the correlation coefficient (CC) values are higher. The results of the classified rain rate test show that the NE and RMSE values of the 2DVD-SCM algorithm are the lowest in all classified rain rates. The overall evaluation results show that the 2DVD-SCM algorithm performs obviously better than the existing three algorithms and have the potential to apply in S-band polarimetric radar monsoon rainfall estimation operational system in South China.

Based on the fifth-generation European Center for Medium-Range Weather Forecasts reanalysis data (ERA5), the real-time observation data from weather stations, and the radar products in Guangdong Province, we analyze the precipitation properties and formation mechanisms of the “5·31” extreme heavy rainfall process with record-breaking 3-h accumulated rainfall in South China during 2021. The results show that the extreme heavy rainfall process is caused by the joint actions of weather systems such as a weak upper-level short-wave trough, a surface stationary front, and a low-level southwesterly jet. Before the heavy precipitation process, there is large precipitable water content and deep warm clouds, which provides a potential for the occurrence and development of the heavy rainfall process in Longhua Town of Longmen County and its surrounding areas. Simultaneously, the low-level southwesterly jet provides abundant warm-wet water vapor for the heavy rainfall area. The vertical atmospheric environmental conditions, such as strong horizontal temperature gradient, high convective available potential energy, high-temperature difference between 850 hPa and 500 hPa, and low convective inhibition, maintain for a long duration in the heavy rainfall area, which are favorable for the occurrence and development of high-efficiency convective precipitation caused by water vapor condensation due to the uplift of low-level warm-wet airflows. The combined effects of the enhanced low-level southwesterly airflow, the stationary front, the mesoscale surface convergence line generated by cold pool outflows, the terrain influence, and the train effect of the precipitation echoes make heavy precipitation near Longhua last longer and stronger than other areas, leading to the extreme heavy rainfall with the record-breaking 3-h accumulated rainfall in Longhua.