In this Letter, we report a compact and robust coherent source, operating in mid-infrared (IR) and based on the Fe:ZnSe chalcogenide gain medium, optically pumped by an Er:ZBLAN fiber laser. The output power of 2.1 W with a 59% slope efficiency with respect to the absorbed pump power at liquid nitrogen cooling is achieved. We show that strong re-absorption at a high pump power and iron ion doping concentrations leads to a continuous tuning of central wavelength from 4012 to 4198 nm. The robustness of a high-power Er:ZBLAN fiber laser combined with prominent spectroscopic properties of Fe:ZnSe media pave the way for the development of a reliable tunable continuous-wave mid-IR sources for scientific and industrial purposes.

This review highlights the development of ultrafast sources in the near- and middle-IR range, developed in the laboratory of Nonlinear Optics and Superstrong Laser Fields at Lomonosov Moscow State University. The design of laser systems is based on a powerful ultrafast Cr:Forsterite system as a front-end and the subsequent nonlinear conversion of radiation into the mid-IR, THz, and UV spectral range. Various schemes of optical parametric amplifiers based on oxide and non-oxide crystals pumped with Cr:Forsterite laser can receive pulses in the range of 4–6 µm with gigawatt peak power. Alternative sources of mid-IR ultrashort laser pulses at a relatively high (MHz) repetition rate are also proposed as difference frequency generators and as a femtosecond mode-locked oscillator based on an Fe:ZnSe crystal. Iron ion-doped chalcogenides (Fe:ZnSe and Fe:CdSe) are shown to be effective gain media for broadband high-peak power mid-IR pulses in this spectral range. The developed sources pave the way for advanced research in strong-field science.

We report on a powerful mid-IR diode-side-pumped tunable E r : L i Y F 4 (Er:YLF) laser electro-optically Q -switched with the help of a K T i O P O 4 crystal. At a 20 Hz repetition rate, the laser pulses with output energy of 82 mJ and 13 ns duration at the wavelength of 2.67 µm are obtained. At higher repetition rates (up to 50 Hz), one can extract up to 20 mJ from the laser cavity. The developed mid-IR laser source demonstrates high peak (up to 6.3 MW) and average (up to 1.7 W) power. Realized wavelength tuning provides access for megawatt-peak power-level nanosecond laser pulses over the 2667–2851 nm wavelength region, which are highly demanded for mid-IR laser systems development and light–matter interaction study in the view of extreme-state creation in liquids and solids, paving the way to novel microprocessing techniques.

We report on the average power increase of a repetitively pulsed (10 Hz) nanosecond 3-mu m laser due to the compensation of a strong thermal lens in the Cr:Er:YSGG laser cavity maintaining the megawatt-level peak power. Thermally-induced beam distortions are measured in a set of 3-mu m erbium crystals (Er:YAG, Er:YSGG, Cr:Er:YSGG), a scheme for compensating a thermal lens in a Cr:Er:YSGG Q-switched laser with a pulse energy of 23 mJ at a repetition rate of 10 Hz in with low-order transverse mode beam is proposed and experimentally implemented. The developed approach makes it possible to control the cavity mode in high-power nanosecond 3-mu m lasers with flashlamp or diode pumping, which are used for a variety of scientific and technological applications, including pumping laser crystals in the middle infrared range, as well as laser-induced microstructuring and tissue engineering.

The chirped pulse amplification (CPA) systems based on transition-metal-ion-doped chalcogenide crystals are promising powerful ultrafast laser sources providing access to sub-TW laser pulses in the mid-IR region, which are highly relevant for essential scientific and technological tasks, including high-field physics and attosecond science. The only way to obtain high-peak power few-cycle pulses is through efficient laser amplification, maintaining the gain bandwidth ultrabroad. In this paper, we report on the approaches for mid-IR broadband laser pulse energy scaling and the broadening of the gain bandwidth of iron-doped chalcogenide crystals. The multi-pass chirped pulse amplification in the Fe:ZnSe crystal with 100 mJ level nanosecond optical pumping provided more than 10 mJ of output energy at 4.6 μm. The broadband amplification in the Fe:ZnS crystal in the vicinity of 3.7 μm supports a gain band of more than 300 nm (FWHM). Spectral synthesis combining Fe:ZnSe and Fe:CdSe gain media allows the increase in the gain band (~500 nm (FWHM)) compared to using a single active element, thus opening the route to direct few-cycle laser pulse generation in the prospective mid-IR spectral range. The features of the nonlinear response of carbon nanotubes in the mid-IR range are investigated, including photoinduced absorption under 4.6 μm excitation. The study intends to expand the capabilities and improve the output characteristics of high-power mid-IR laser systems.

The effect of the length and pressure of an argon gas jet on low-order harmonics (5th, 7th, 9th, and 11th) generation by 4.5-μm femtosecond laser radiation of a Fe:ZnSe laser system has been studied experimentally. It has been shown that an increase in the length of the generation medium up to the waist length allows one to increase the generation efficiency by a factor of 12. It has also been demonstrated that a change in the length of the gas medium changes the pressure dependence of the energy of the generated radiation because of change in the phase matching conditions, whose correct simulation requires the inclusion of nonlinear propagation effects for pump pulse and generated harmonics.