BO GAO

Mr. BO GAO

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 November 2023 in PLOS ONE
Verified
Journal Article
Open access
PDF file
GLGen feng Li
Gen feng Li
BGBO GAO
BO GAO
CZCong Zhu
Cong Zhu
HHHao Hu
Hao Hu
HFHuaqiang Fang
Huaqiang Fang
This study takes the aeolian sand concrete as a research object, uses the relative dynamic elastic modulus to study its macro characteristics, and combines nuclear magnetic resonance、scanning electron microscope to study its pore characteristics and micro morphology under the action of prestress, freeze-thaw and salt intrusion. The results show that with the increase of the amount of aeolian sand, the dynamic elastic modulus of aeolian sand concrete shows a pattern of first decreasing, then increasing, and then decreasing; when no prestress is applied, the porosity of aeolian sand concrete first increases, then decreases, and then continues to increase. Among them, the porosity of aeolian sand concrete with a 40% content of aeolian sand decreases by 0.06% compared to that with a 0% content of aeolian sand, and decreases by 0.003% compared to that with a 60% content of aeolian sand; with the increase of prestress, the porosity of aeolian sand concrete with the same amount of aeolian sand increases gradually with the increase of damage degree. The porosity of concrete with 40% aeolian sand content increases by 0.33% when the damage degree is 0.0 compared to 0.3, with a 6.31% increase in the number of multi damage pores; under the coupling effect of multiple factors, when the amount of aeolian sand is 40%, the damage degree of the four groups of aeolian sand concrete before and after the coupling effect is 0.0, 0.1, 0.2, and 0.3, respectively, increases by 25.8%, 32.2%, 73.8%, and 85.8%, respectively; under the coupling effect of multiple factors, the content of aeolian sand is 60%, the damage degree is 0.2 and 0.3 groups, and the content of aeolian sand is 20%, the damage degree is 0.3 groups, which does not meet the standard requirements; under the coupling action of stress, freeze-thaw, salt intrusion and the amount of aeolian sand, the filling effect of aeolian sand on the internal pores of aeolian sand concrete decreases first, then increases, and then decreases with the increase of the amount of aeolian sand. The filling effect is further weakened after the action of stress. After the superposition of freeze-thaw and salt intrusion, the coupling effect of water and salt solution in frost heaving medium makes the variation law and range of physical and chemical characteristics of aeolian sand concrete show a great difference.

5 January 2023 in JOM
Verified
Journal Article
Closed access
PDF file
GLGen feng Li
Gen feng Li
BGBO GAO
BO GAO
XSXiangdong Shen
Xiangdong Shen
CZCong Zhu
Cong Zhu
HFHuaqiang Fang
Huaqiang Fang

10 August 2022 in Advances in Polymer Technology
Verified
Journal Article
Open access
PDF file
BGBO GAO
BO GAO
ZLZhuo Li
Zhuo Li
Penetrating cracks with different crack angles were prefabricated in viscoelastic hydroxyl-terminated polybutadiene propellant specimens. Microphotography was performed while tensile tests were conducted on a universal testing machine at tensile rates of 2 mm/min, 10 mm/min, and 500 mm/min. Specimen measurements were obtained by digital image correlation (DIC). The strain fields on the surfaces and around the cracks were studied, and the crack propagation trends for precracked specimens with angles of 0°, 45°, and 75° with respect to the horizontal plane were investigated. Stress–strain curves, tensile microscopic images (50x magnification), and fracture microscopic images (100x magnification) were obtained for different prefabricated crack angles and different stretching rates. It was observed that under low-rate stretching, the propellant crack growth exhibited three stages: a linear stage, a yield stage, and a failure stage. However, the crack propagation in the propellant under high-speed stretching had no yield stage. When there were no prefabricated cracks, a greater tensile rate led to a greater ultimate strain. The maximum strains at the crack tips measured by DIC decreased from group C1 to groups C2, C3, and S. The specimens corresponding to different crack inclination angles are pulled off. It was seen that the closer a crack was to positive breaking, the straighter was the edge notch of the specimen.

14 February 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
GLGenfeng Li
Genfeng Li
BGBO GAO
BO GAO
HHHao Hu
Hao Hu
RCRuifu Cui
Ruifu Cui
JFJiwei Feng
Jiwei Feng
JHJian He
Jian He
In an effort to elucidate the fatigue behavior of hydroxyl-terminated polybutadiene (HTPB) propellant with prefabricated cracks under strain-controlled conditions, a comprehensive experimental study was conducted employing an MTS fatigue testing machine. The experimental design included four cohorts of specimens: a control group of un-notched specimens and three experimental groups featuring notched specimens with prefabricated cracks oriented at distinct angles (0°, 45°, and 75°) relative to the horizontal. Throughout the duration of the fatigue tests, an infrared thermographic camera was employed to meticulously monitor the temperature variations across the surface of each specimen. The collected data revealed that an escalation in strain amplitude, when subjected to a constant frequency, is directly correlated with a decrement in the fatigue life of the HTPB propellant. Notably, the fatigue lives of the specimens with prefabricated cracks were observed to be congruent, culminating at approximately 2*10^4 cycles, and maintaining a consistent order of magnitude. Conversely, the un-notched specimens demonstrated a substantially more enduring fatigue life, extending to 1*10^6 cycles, thereby manifesting a cross-order phenomenon.Throughout the fatigue testing, the specimens exhibited a pronounced strain hysteresis effect, which is indicative of their pronounced viscoelastic attributes. Concurrently, the thermal monitoring of the specimens across the four experimental groups uniformly displayed an escalating temperature trend. Intriguingly, a positive correlation was identified between the final surface temperature and the fatigue life of the specimens, suggesting a potential interplay between the heat generated due to viscoelastic dissipation and the material’s resistance to fatigue under cyclic loading.

3 March 2023 in JOM
Verified
Journal Article
Open access
PDF file
GLGen feng Li
Gen feng Li
BGBO GAO
BO GAO
XSXiangdong Shen
Xiangdong Shen
CZCong Zhu
Cong Zhu
HFHuaqiang Fang
Huaqiang Fang

1 June 2022 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
BGBO GAO
BO GAO
ZLZhuo Li
Zhuo Li
A cantilever beam test specimen of a viscoelastic material, which is sourced from the hydroxy-terminated polybutadiene (HTPB) propellant, has been made. The traditional experimental modal analysis (EMA) is performed using the SIEMENS TESTLAB software to obtain the first six orders of modal frequencies based on the Poly MAX method, thereby determining the frequency range associated with the frequency domain analysis. The relaxation modulus of this viscoelastic material is first measured using a thermo-viscoelasticity analyzer (DMA); subsequently, the relaxation modulus is adopted to fit the 19-parameter Prony series of conformational models that characterize this viscoelastic material. Sinusoidal frequency sweep is then conducted on the SIEMENS TESTLAB platform, and the corresponding measured signals are obtained. Using the finite element method, a transient analysis simulation of the experimental conditions is performed. The dynamic response of this viscoelastic material under sinusoidal frequency sweep is evaluated by comparing it with the experimental data. It is observed that the overall acceleration peak error and the finite element simulation result are less than 3%. This study verifies that the obtained static constitutive equation (19-parameter Prony series) can describe the dynamic responses at low frequencies (<80 Hz).