In this paper, a conventional wavelength band (C-band) fiber laser with a tunable single-longitudinal-mode (SLM) output using multilayer graphene as a saturable absorber is demonstrated. The proposed fiber laser uses a short length of highly doped erbium-doped fiber (EDF) as the gain medium and a fiber ferrule with graphene flakes adhered to it by index matching gel (IMG) that acts as the saturable absorber. The fiber laser is able to generate an adjustable wavelength output between 1547.88 and 1559.88 nm with an average peak power of -6.48 dBm with a measured signal-to-noise ratio between 66.0 and 68.3 dB. The SLM output is verified by the absence of frequency beating in the radio frequency (RF) spectrum output and by a measured linewidth of 206.25 kHz using the self-heterodyne technique. The deposition of graphene flakes on the fiber ferrule using the IMG is a new and effective technique to generate SLM operation in the fiber laser.

In this letter, a molybdenum disulfide (MoS ₂ ) saturable absorber (SA) is fabricated using a simple drop cast method to generate Q-switched fiber laser operating in the S-band region (1460 nm–1530 nm). The MoS ₂ solution was prepared using the liquid phase exfoliation (LPE) method where MoS ₂ crystals were added into dimethylformamide (DMF) solvent and subsequently sonicated and centrifuged. They were then repeatedly dripped onto fiber ferrules and dried in an oven. The resultant Q-switched fiber laser starts with some physical disturbance when the pump power was set at 40 mW and continues to operate until the pump power reaches 120 mW. The resultant repetition rate varies with pump power between 27.17 to 101.17 kHz while the changes in pulse widths are from 3.0 to 1.4 μ s.

A multiwavelength generation in a random distributed feedback fiber laser based on hybrid Raman and erbium gain and a Lyot all-fiber spectral filter is demonstrated for the first time. The use of erbium-doped fiber allows a multi-wavelength generation to be achieved at lower pump powers in comparison with random fiber lasers based on Raman gain only. The operating bandwidth and flatness of power distribution between different lines in generation are also improved in the hybrid gain configuration.