Jeffrey D. Naber

Prof. Dr. Jeffrey D. Naber

Department of Mechanical Engineering-Engineering Mechanics, Michigan Technological University, Houghton, MI, USA

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 January 2024 in Control Engineering Practice
Verified
Journal Article
Closed access
SBSadaf Batool
Sadaf Batool
Jeffrey D. NaberJeffrey D. Naber
Jeffrey D. Naber
MSMahdi Shahbakhti
Mahdi Shahbakhti

20 April 2009 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
KCKrishna Pradeep Chilumukuru
Krishna Pradeep Chilumukuru
RARohith Arasappa
Rohith Arasappa
JJJohn H. Johnson
John H. Johnson
Jeffrey D. NaberJeffrey D. Naber
Jeffrey D. Naber
Active regeneration experiments were performed on a Cummins 2007 aftertreatment system by hydrocarbon dosing with injection of diesel fuel downstream of the turbocharger. The main objective was to characterize the thermal oxidation rate as a function of temperature and particulate matter (PM) loading of the catalyzed particulate filter (CPF). Partial regeneration tests were carried out to ensure measureable masses are retained in the CPF in order to model the oxidation kinetics. The CPF was subsequently re-loaded to determine the effects of partial regeneration during post-loading. A methodology for gathering particulate data for analysis and determination of thermal oxidation in a CPF system operating in the engine exhaust was developed. Durations of the active regeneration experiments were estimated using previous active regeneration work by Singh et al. 2006 [1] and were adjusted as the experiments progressed using a lumped oxidation model [2, 3]. Repeat experiments were conducted to evaluate the reproducibility of the experimental data. In this study a higher global reaction rate for the lowest PM loadings of 1.1 g/L was observed as compared to 2.2 and 4.1 g/L loadings. It was also observed that for the highest PM loading and CPF temperature, the fuel specific PM oxidized was the greatest. Also, active regeneration experiments with shorter durations for similar PM loadings and average CPF temperatures proved more effective in terms of fuel specific PM oxidation. The experimental results were used for calibration of the MTU 1D 2 Layer active regeneration model which is described by Arasappa et al., 2009 [4].

19 November 2013 in Journal of Engineering for Gas Turbines and Power
Verified
Journal Article
Closed access
PDF file
LJLibin Jia
Libin Jia
Jeffrey D. NaberJeffrey D. Naber
Jeffrey D. Naber
JBJason Blough
Jason Blough
SZSeyed Alireza Zekavat
Seyed Alireza Zekavat
Accelerometer-based combustion sensing in diesel engines has the potential of providing feedback for combustion control to reduce fuel consumption and engine emissions at a lower cost than in-cylinder pressure sensors. In this work, triaxial block-mounted accelerometers were used to measure the engine vibration, and pressure transducers were installed to measure the in-cylinder pressure. The in-cylinder pressure can be further utilized to compute combustion metrics, including the apparent heat release rate (AHR). Engine tests were conducted for various speeds, torques, and start of injections, on a 9 L in-line six-cylinder diesel engine equipped with a common rail high pressure injection system. The relationship between engine block acceleration and AHR was modeled using a radial basis function neural network (RBFNN). By inputting the accelerometer signal to the fixed network, AHR and other combustion metrics were estimated. As the primary concern for radial basis network training is the hidden layer weight vector selection, two algorithms for weight vector selection (modified Gram–Schmidt orthogonalization and principal component analysis) were evaluated by examining the robustness of the resulting network. One-third of the conducted tests were utilized to train the network. The network was then applied to estimate the AHR for the remaining validation tests which were not used to train the network. Comparisons were made based on the combustion metrics estimation results and the selection efficiency among the two weight vector selection methods and the random selection method. Moreover, the capability concerning the network's tolerance for additive noise was also investigated. Results confirmed that the modified Gram–Schmidt method achieved much more accurately estimated combustion metrics with the highest efficiency. On the basis of this study, a real-time closed-loop control strategy was proposed with the feedback provided based on the application of the trained RBFNN.

5 April 2016 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Open access
AZAnqi Zhang
Anqi Zhang
RSRiccardo Scarcelli
Riccardo Scarcelli
SLSeong-Young Lee
Seong-Young Lee
TWThomas Wallner
Thomas Wallner
Jeffrey D. NaberJeffrey D. Naber
Jeffrey D. Naber
It is beneficial but challenging to operate spark-ignition engines under highly lean and dilute conditions. The unstable ignition behavior can result in downgraded combustion performance in engine cylinders. Numerical approach is serving as a promising tool to identify the ignition requirements by providing insight into the complex physical/chemical phenomena. An effort to simulate the early stage of flame kernel initiation in lean and dilute fuel/air mixture has been made and discussed in this paper. The simulations are set to validate against laboratory results of spark ignition behavior in a constant volume combustion vessel. In order to present a practical as well as comprehensive ignition model, the simulations are performed by taking into consideration the discharge circuit analysis, the detailed reaction mechanism, and local heat transfer between the flame kernel and spark plug. The energy profile and the energy source geometry are investigated in detail to represent the physics of electrical discharge. It was observed in the experiments that a sufficiently high ambient pressure is necessary for a successful ignition event in the lean and dilute mixture when the spark plug gap size and primary energy input are held constant. By adopting realistic energy levels, this detailed energy deposition model showed the capability to reasonably present such ignition behavior transition. The unique combination of energy deposition profile and geometry reveals the complexity of electrical discharge during the spark ignition event. The response of the combustible gas to the energy deposition showed dependency on the volumetric energy density, energy source’s surface area, temperature gradient at the energy source boundary, as well as the heat transfer condition local to the flame kernel.

3 April 2018 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
LZLe Zhao
Le Zhao
ZZZhihao Zhao
Zhihao Zhao
XZXiucheng Zhu
Xiucheng Zhu
NANitisha Ahuja
Nitisha Ahuja
Jeffrey D. NaberJeffrey D. Naber
Jeffrey D. Naber
SLSeong-Young Lee
Seong-Young Lee
Fuel film formed in the spray-piston or cylinder wall impingement plays a critical role in engine performance and emissions. In this paper, the fuel film formation and the relevant film characteristics resulting from the liquid spray impinging on a flat plate were investigated in a constant volume combustion vessel by Refractive Index Matching (RIM) technique. The liquid film thickness was firstly calibrated with two different proportional mixtures (5% n-dodecane and 95% n-heptane; 10% n-dodecane and 90% n-heptane by volume) pumped out from a precise syringe to achieve an accurate calibration. After calibration, n-heptane fuel from a side-mounted single-hole diesel injector was then injected on a roughened glass with the same optical setup. The ambient temperature and the plate temperature are set to 423 K with the fuel temperature of 363 K. The effects of various ambient density (14.8, 22.8, and 30.0 kg/m3) and injector pressure (120 and 150 MPa) on the liquid film properties were studied. The analysis of film formation contain the spatial distribution and time-resolved evolution of fuel film thickness, the film wetted area, and the film mass at the different operating conditions. The experimental results indicated that the fuel film behaviors are significantly influenced by the injection pressure but show insignificant difference at the relatively high ambient density. The larger local film thickness distributed near the impingement point region. The local film thickness decreased with the ambient density and injection pressure.

1 March 2014 in Applied Thermal Engineering
Verified
Journal Article
Closed access
HGHaiwen Ge
Haiwen Ge
MNMichael Norconk
Michael Norconk
SLSeong-Young Lee
Seong-Young Lee
Jeffrey D. NaberJeffrey D. Naber
Jeffrey D. Naber
SWSteve Wooldridge
Steve Wooldridge
JYJames Yi
James Yi