In this paper, a half-plane time-domain boundary element method (BEM) was presented for analysing the 2-D scalar wave problems in a homogenous isotropic linear elastic medium. Using the existing transient full-plane fundamental solution and asking for the assistance of method of source image to satisfy the stress-free boundary conditions, first, a half-plane time-domain fundamental solution was obtained for displacement and traction fields. Then, the condensed closed-form of half-plane time-convoluted kernels were extracted analytically by applying the time-convolution integral on the determined half-plane fundamental solutions. After implementing the half-plane time-domain BEM in computer codes, its applicability and efficiency were verified and compared with those of the published works by analysing several practical examples. The studies showed that the proposed method had good agreement with the existing solutions. Compared to the full-plane time-domain BEM, half-plane time-domain BEM had more capability and better accuracy as well as much shorter run time. It is obvious that this method can be practically used to analyse the site response in substituting the old-style time-domain BEM formulation as well.
1 August 2016 in Journal of Rock Mechanics and Geotechnical Engineering
In this paper, stress behavior of shallow tunnels under simultaneous non-uniform surface traction and symmetric gravity loading was studied using a direct boundary element method (BEM). The existing full-plane elastostatic fundamental solutions to displacement and stress fields were used and implemented in a developed algorithm. The cross-section of the tunnel was considered in circular, square, and horseshoe shapes and the lateral coefficient of the domain was assumed as unit quantity. Double-node procedure of the BEM was applied at the corners to improve the model including sudden traction changes. The results showed that the method used was a powerful tool for modeling underground openings under various external as well as internal loads. Eccentric loads significantly influenced the stress pattern of the surrounding tunnel. The achievements can be practically used in completing and modifying regulations for stability investigation of shallow tunnels
This paper extends a method, which has been previously called half-plane time-domain boundary element method (BEM) and successfully applied to 2-D concave topographies, for analysing convex irregular sites subjected to vertically as well as obliquely propagating incident SH waves. While using this method, only interface and surface of the hill needed to be discretized. During the use of the proposed substructuring process and dividing the problem into two domains of a half-space and a surface topography totally above the half-space, the method was employed for each of them. After satisfying continuity and boundary conditions, the problem was finally solved as an original coupled domain. To validate the presented method, three different examples were examined and the results were compared with those of the published works. A semi-circular cylindrical hill, a Gaussian-shaped ridge and a semi-circular hill joined by an inside concentric full/semi-circular cavity were investigated due to antiplane waves as Ricker wavelets type. The results showed that not only capability and efficiency of the method were very good but also much shorter run time than that of full-plane BEM formulation was obtained. The proposed method can be practically used to analyse site response in substituting traditional time-domain BEM as well.
6 May 2023 in Engineering Analysis with Boundary Elements