It is well known that nowadays as well as in the past the vast majority of human habitation and activities are mainly concentrated in littoral areas. Thus the increased attention to coastal zone management contributed to the development and implementation of shallow-water mapping approaches for capturing current environmental conditions. During the last decade, geophysical imaging techniques like electrical resistivity tomography (ERT) have been used in mapping onshore buried antiquities in a non-destructive manner, contributing to cultural heritage management. Despite its increased implementation in mapping on-shore buried archaeological remains, ERT has minimal to non-existent employment for the understanding of the past dynamics in littoral and shallow off-shore marine environments. This work presents the results of an extensive ERT survey in investigating part of the Hellenistic to Byzantine submerged archaeological site of Olous, located on the north-eastern coast of Crete, Greece. A marine area of 7100 m2 was covered with 178 densely spaced ERT lines having a cumulative length of 8.3 km. A combination of submerged static and moving survey modes were used to document potential buried and submerged structures. The acquired data from the marine environment were processed with two-dimensional and three-dimensional inversion algorithms. A real time kinematic global navigation satellite system was used to map the visible submerged walls and compile the bathymetry model of the bay. The adaptation of ERT in reconstructing the underwater archaeological remains in a shallow marine environment presented specific methodological and processing challenges. The in situ experience from the archaeological site of Olous showed that ERT provided a robust method for mapping the submerged archaeological structures related to the ancient built environment (walls, buildings, roads), signifying at the same time the vertical stratigraphy of the submerged sediments. The inherent limitation of employing ERT in a conductive environment is counterbalanced by the incorporation of precise knowledge for the conductivity and bathymetry of the saline water in the modelling and inversion procedure. Although the methodology definitely needs further refinement, the overall outcomes of this work underline the potential of ERT imaging being integrated into wider shallow marine projects for the mapping of archaeological sites in similar environmental regimes.
This study explores the applicability and effectiveness of electrical resistivity tomography (ERT) as a tool for the high-resolution mapping of submerged and buried shipwrecks in 3D. This approach was trialled through modelling and field studies of Crowie, a paddle steamer barge which sunk at anchor in the Murray River at Morgan, South Australia, in the late 1950s. The mainly metallic structure of the ship is easily recognisable in the ERT data and was mapped in 3D both subaqueously and beneath the sediment-water interface. The innovative and successful use of ERT in this case study demonstrates that 3D ERT can be used for the detailed mapping of submerged cultural material. It will be particularly useful where other geophysical and diver based mapping techniques may be inappropriate due to shallow water depths, poor visibility, or other constraints.
Three-dimensional (3D) modelling is becoming a ubiquitous technology for the interpretation of cultural heritage objects. However most 3D models are based on geomatic data such as surveying, laser scanning or photogrammetry and therefore rely on the subject of the study being visible. This chapter presents the case study of Crowie, a submerged and partially buried barge wrecked near the town of Morgan in South Australia. Crowie was reconstructed using two alternative approaches; one based on a combination of historic photographs and computer graphics and the second based on geophysical data from electrical resistivity tomography (ERT). ERT has been rarely used for maritime archaeology despite providing 3D representation under challenging survey conditions, such as in shallow and turbid water. ERT was particularly successful on Crowie for mapping the external metal cladding, which was recognisable based on very low resistivity values. An alternative 3D model was created using historic photographs and dimensions for Crowie in combination with information from acoustic geophysical surveys. The excellent correspondence between these models demonstrates the efficacy of ERT in shallow maritime archaeology contexts.