Co-gasification of coal and biomass is an important way to reduce the consumption of fossil fuels and achieve the efficient utilization of biomass resources. Two kinds of biomass containing corn straw (CS) and poplar sawdust (PS) were blended with different coal. Then, the coal char was separated from the blended char after co-pyrolysis based on the difference in particle size. The structural properties, including alkali and alkaline earth metals (AAEMs), microcrystalline structures, and molecular structures of the char samples were analyzed. Gasification reactivity of the char was determined by thermogravimetric analyzer (TGA). Results indicated that K and Mg contents in biomass evaporated easily and deposited on coal char, resulting in the increase in those in coal char during co-pyrolysis, and then the AAEMs contents in coal char were determined by the AAEM species and contents in biomass. Meanwhile, the inhibition effect on the graphitization degree of coal char increased with increasing blend ratio. Likewise, the inhibition effect of CS was higher than that of PS at the same blend ratio. The catalytic activity of inorganic mineral played a much more important role in predicting gasification reactivity than graphitization degree, and then the combination of alkali index and stacking layer number was proposed to better predict the reactivity of coal char.
1 August 2020 in Journal of Fuel Chemistry and Technology
Molecular sieve catalysts containing transition metals have been attracting attention for their potential applications in various fields, including environmental and industrial catalysis. A Cu-Ce-Zr/SAPO-34 series of molecular sieve catalysts were prepared by the impregnation method, and the effect of Zr introduction on the selective catalytic reduction of NO by Cu-Ce/SAPO-34 molecular sieve catalysts was explored. Through various characterization methods, the physical and chemical properties of the catalysts were analyzed, and the denitration mechanism of the molecular sieve catalyst was discussed. This study found that the total acid content of the acid sites on the catalyst surface decreased with the introduction of Zr, leading to a decrease in the denitration efficiency of the catalyst. At 350–400 °C, the denitration efficiency of the 4Cu-4Ce-4Zr/SAPO-34 catalyst was over 80%, and at 400–500 °C, it was over 99%. Moreover, excessive metal Zr could destroy its CHA structure and decrease the denitration efficiency of the catalyst. This study analyzed the reaction mechanism of NH3-SCR of Zr-modified polymetallic zeolites and the effect of Zr modification on the NH3-SCR reaction results. This study contributes to the understanding of the performance of molecular sieve catalysts containing transition metals. Reliable conclusions were obtained, which offer data support for future research in the field of NH3-SCR.