Recovering copper foil and crushed aluminum from end-of-life vehicles (ELVs) is a significant issue in the recycling industry. As a key technology for sorting aluminum, copper, and other non-ferrous metals, eddy current separation (ECS) is efficient in isolating the non-ferrous metals according to their different electrical conductivity and density. However, further research is still needed in the separation of large-size copper foil and crushed aluminum from scrapped vehicles. In this study, support vector regression (SVR) and the sparrow search algorithm (SSA) are exploited for the first time to be used in optimizing the Halbach magnetic roller. Firstly, the numerical simulation results are based on the response surface methodology (RSM). Then, the accuracy of four kernel functions employing SVR is compared to select a kernel function. The sparrow search algorithm (SSA) is proposed to optimize the structural parameters of the Halbach magnetic roller, concentrating on the above-selected kernel function. Meanwhile, the parameters are confirmed. Numerical simulation results indicate that machine learning for magnetic roller optimization is feasible.
The forming defects of parts mainly include fracture, springback, thermal expansion, and rough surface during electric hot incremental forming, in which the springback and thermal expansion directly affects the dimensional accuracy of parts. In this paper, the combined optimization of process parameters and unsupported distances was proposed to control the dimensional accuracy of forming parts in the electric hot incremental sheet forming process. The predictive model of major errors was established through the response surface methodology, and then the multi-objective optimal model was obtained using Non-dominated Sorting Genetic Algorithms-II (NSGA-II). Meanwhile, a multi-objective optimal result was determined according to the error compensation feature of the forming process. On this basis, the effect of unsupported distances on dimensional errors was analyzed in detail, and a valid unsupported distance was proposed to further improve the forming accuracy of the whole forming region. Finally, the experimental result demonstrated that the combined optimal method proposed was accurate and feasible.
The separation of non-magnetic non-ferrous metals such as copper and aluminum from scrapped automobiles is a critical area of research due to the increasing number of end-of-life vehicles. Traditional eddy current separation methods have limitations, particularly in handling large-sized broken copper and aluminum parts. This paper proposes a novel magnetic roller model featuring a circumferential–axial periodic arrangement of permanent magnets. This study explores the external magnetic field distribution of this new roller design by constructing an equivalent current model, solving magnetic scalar potential equations, and employing simulation tools. The findings indicate that the new magnet array enhances both the magnetic field strength and the range of the external magnetic field, leading to improved separation efficiency of large-sized metal fragments. The results provide a theoretical basis for advancing the separation technology of large-sized broken copper and aluminum parts in scrapped automobiles, offering potential improvements in the recycling of non-ferrous metals from end-of-life vehicles.
The effect of process parameters on geometric dimensions is complex during belt-heated incremental sheet forming, leading to control difficulties in the geometric dimension of parts. In this study, the geometric errors were analyzed under the action of different process parameters, and the corresponding influence law was obtained through macro- and microexperiments. On this basis, the micromorphology of the deformation region section was analyzed in detail, and the effect of process parameters on micromorphology characteristics was obtained during belt-heated incremental sheet forming. Meanwhile, the dislocation density of the deformation region section was analyzed through XRD, and the change law of the dislocation density was revealed under the action of different process parameters. Therefore, the macro and micro effect mechanism of process parameters on geometric dimensions was verified, and then the control method of the geometric dimension was obtained in belt-heated incremental sheet forming.
The development of technology has driven a rising need for high-accuracy and high-efficiency manufacturing of low-volume products. Incremental forming technology, characterized by die-free flexibility and low production costs, can effectively replace stamping processes for manufacturing customized small-batch products. However, high-performance aluminum alloys generally exhibit poor room-temperature plasticity but excellent high-temperature plasticity, necessitating the integration of thermal-assisted methods for manufacturing such products. However, the temperature of the forming region will excessively rise without temperature control, which will affect the forming performance of the material in hot incremental sheet forming of AA2024-T4 aluminum alloy. This study focuses on AA2024-T4 aluminum alloy and proposes a uniform temperature control method for the electric hot tube-assisted incremental sheet forming process, incorporating an adaptive fuzzy PID algorithm. The temperature difference of the forming region is lower than 6% under the various temperatures. On this basis, the forming limit angle and the microstructure state of the material are analyzed, and the grain feature of the material exhibits significantly refined grains and the uniform fine grain distribution under 180 °C with the temperature control of the adaptive fuzzy PID algorithm.
Recently, integral electric hot incremental forming technology has been proposed to form hard-to-form sheet metals and to eliminate some defects obtained through the local heating method via current, such as inhomogeneous temperature distribution, arc burns for the sheet and the tool, unsuitability for multistage forming, etc. However, the simulation of integral electric hot incremental forming involves coupled electro-thermal-mechanical analysis, which is difficult through existing simulation software. Meanwhile, the effect of the electrode structure on temperature distribution is not clear; therefore, a preheating flux model for Joule heat was proposed to simulate the temperature distribution of Ti-6Al-4V titanium alloy sheet in this work, which could simplify the coupled electro-thermal-mechanical analysis to the coupled thermal–mechanical simulation. Meanwhile, the effect of the electrode section and length on the temperature distribution was analyzed in detail, and then a design criterion for the electrode length was obtained during integral electric hot incremental forming.