Natural fibers are one of effective substitute for switching artificial fiber and concentrating to reinforce polymer matrixes due to their decomposable character. This study was implied to realize physico-chemical properties of bio fiber obtained from Heteropogon contortus (HC) plant. Heteropogon contortus fibers (HCFs) had cellulose (64.87 wt. %), hemicellulose (19.34 wt. %), lignin (13.56 wt. %), and low density (602 kg/m3). The chemical functional group of HCFs was established by Fourier transform infrared spectroscopy, thermal stability of the fiber up to 220°C discovered by thermogravimetric analysis. Further the assets of HCFs proved that it can act as an excellent reinforcement material as a bio composite. Finally, the tensile properties were carried out through single fiber tensile tests, such as tensile strength, tensile modulus and microfibrillar angle.
Owing to their low weight-to-high strength ratio and recyclable features, the natural fibers are the most potential choice in place of synthetic fibers and been used as reinforcement materials in polymer matrix composites. Characterization of Ceiba pentandra bark fibers (CPFs) such chemical analysis, Fourier Transform-Infrared Analysis (FTIR), X-ray diffraction, thermogravimetric analysis, and Differential thermogravimetric analysis (DTG) analysis has analyzed. CPFs contain 60.9% (w/w) of cellulose, 17.5% (w/w) of hemicellulose, and 23.5% (w/w) of lignin. Besides, its density and crystallinity index are 682 kg m−3 and 57.94%, respectively. TG and DTG analysis discovered that CPFs are thermally stable up to 342.1°C. Further, all the resources of CPFs ensured that it can be an excellent alternative for synthetic fibers in polymer matrix composites.
1 April 2018 in Journal of Manufacturing Processes
Due to the growing environmental concerns of petroleum-based plastics, there has been a surge of interest in biodegradable alternatives. In this study, starch-based bioplastic was prepared using biopolymers extracted from corn and potato and the biopolymer was mixed with calcium carbonate (filler) and plasticizers (glycerol-sorbitol) and evaluated. For the fabricated formulation, Taguchi analysis gave an optimal formulation of 9 g corn starch, 9 mL glycerol, and 2.5 g calcium carbonate, having a well-balanced mechanical strength, flexibility, and biodegradability. The results showed a major improvement in tensile strength of 22.5% (6.08 MPa) and a 31.7% increase in Young’s modulus (0.103 GPa), compared to the least effective sample. In biodegradation tests, the degradation rate of C1 (66.68%) was the fastest, while C3 had a slower rate (29.08%). Moisture absorption varied considerably, with sample COM3 absorbing 25.92% compared to just 4.35% for P3, while P3 absorbed only 4.35%. Among compounds, the higher and lower percentage for water solubility were for P1 (20.50%) and C3 (49.04%) respectively. These results underscore the potential of starch-based bioplastics for sustainable packaging, offering an environmentally friendly option compared to traditional plastics.