This paper proposes a novel path-following control algorithm for articulated steer vehicles (ASV) by dynamic virtual terrain field (VTF) method. The altitude function of VTF, with robustness in fitting different working conditions, is adapted for the derivation of target steering wheel angle. Prior to the development of the controller, the nonlinear ASV model coupling with a full-hydraulic steering system is verified by real test and Adams/View software simulation. To get a precise path-following result, the sideslip angle is considered and controlled by ‘direct sideslip control’ and ‘road roll control’. The function of VTF is established and divided into primary and dynamic terrain field reference to the parameter variabilities. According to the vehicle dynamics model and the tire forces generated from the vehicle inclination on virtual terrain, the target articulation angle composed of the main angle and compensatory angle is derived. Simulations of path-following control at different road conditions, together with other types of controllers, are conducted and compared to show the feasibility and effectiveness of the proposed path-following control algorithm.
30 June 2016 in International Journal of Automotive Technology
This paper presents a new model for the hydraulic steering mode of articulated heavy vehicles (AHVs). The objective is to obtain the more accurate vehicle performance during steering process. The dynamic analyses of the hydraulic steering system, and the kinematic analyses of steering mechanical structure, including the steering wheel, articulation joint, and struts provide the constraints for the study of steering process with the principle of the least resistance. Meanwhile, a 3-DOF dynamic model is developed to analyze the force characteristics of vehicle components. In order to verify the model, field tests and the comparisons with existing researches are performed. The results show that the present model is more effective and similar with the real steering process of AHVs. Moreover, another three conclusions can also be drawn: 1) only 20% hydraulic pressure provides steering driving force. And the rest is wasted, which is used to overcome the resistance of outlet pressure in hydraulic system itself; 2) the lateral resistance of each wheel are much great than the longitudinal, but for the energy consumptions of lateral direction only accounting for 0.1% of longitudinal. Therefore, the lateral forces cannot be ignored in the dynamic model. But for the control strategy with minimum energy consumption, it is useless to consider the energy of lateral impact; 3) road conditions or vehicle parameters such as the load, the wheel tread, or the wheel base influence wheel resistances easily, which further influence the vehicle steering process. Furthermore, the vehicle trajectory and differential forces of each wheel obtained from the model are credibility to be the reference of intelligent control for AHVs.
With the development of unmanned tracked vehicles, soil model predictions of soft terrains are becoming more essential. In order to accurately simulate the interaction characteristics between soil particles and the track, soil modeling with a discrete element method (DEM) is proposed. Volume-based scaled-up modeling of DEM soil particles and the calibration of DEM input parameters were investigated as a feasible approach to realizing many particle calculations. Calibration of DEM input parameters can solve the distortions between actual and DEM particle sizes. Cohesion and friction parameters of the scaled-up soil particle model were recalibrated by the shape accumulated through the virtual design of the experiment. Soil DEM particles were scaled up to 1 mm spherical particles, and recalibrated DEM parameter values were used to match the actual accumulated soil shape. Three calibrated scaled-up soil models were used for the shear stress–displacement DEM simulation of a track segment, and the mean absolute percentage error (MAPE) was less than 11% compared with the actual shear stress–displacement test. The parameter value of soil traction performance empirical model of a tracked vehicle is modified according to the soil shear stress–displacement DEM simulation. Comparative analysis was performed for travel test results of a tracked vehicle; the relative error of the soil traction prediction results to actuals was less than 16.8%. This showed that the volume-based particle scaling technique is an effective DEM for the mechanical simulation of soil.
12 April 2010 in SAE International Journal of Advances and Current Practices in Mobility
The articulated dump truck with independent suspensions is driven by six AC motors and each wheel is driven by one motor. Cooling system is configured in every electric wheel. The motor is the main heating source in the electric drive system. Hence, the cooling of the motor will affect the reliability and power-density of the whole electric drive system. According to the actual working conditions, the heating calculation about the cooling system has been carried out during the design process. The design concept of embedding spiral-shaped flow path in the shell of the stator has been drawn. The cooling water could pass through the path and accomplish cooling outside the stator. In this paper, the FLUENT has been used for the 3-D numerical simulation of the cooling system. The temperature field distributions of the cooling water and the shell are obtained. To analyze the influence of the shell structure on the cooling effect, the iSIGHT has been used to accomplish the structural and thermal optimization. The simulation and optimization results show that the cooling water velocity has little effect on the cooling, but the structure of the shell affects the cooling greatly. Finally, the section sizes of the shell flow path are optimized. As a result, the average temperature of the shell wall has reduced from 364K to 357K. The cooling effect can be improved significantly.