A hard magnetic system of SrFe 12 O 19 nanomaterial was modified according to the composition of Sr 0.95 Gd 0.05 Fe
12−
x Cu x O 19 with x = 0.0, 0.30, and 0.60 using the sol–gel technique.
This study reports the formation of Er-doped nanocrystalline cobalt ferrite with the formula CoFe2-x Er x O4 (0.0 ≤ x ≤ 0.10) from nontoxic metal precursors Co(NO3)2·6H2O, Fe(NO3)3·9H2O, and Er(NO3)3·5H2O through an easy and economical sol-gel route in which citric acid is served as the chelating agent. The as-prepared powder was annealed at 700 °C for 3 h in ambient air to get the required spinel structure. The annealed samples were subjected to structural and magnetic characterization. The X-ray diffraction (XRD) data of the samples confirmed the cubic spinel structure formation. The average crystallite size evaluated from XRD data increased from 21 to 34 nm with the substitution of Er due to the larger atomic size of Er3+ than Fe3+. Moreover, the crystallite size obtained from XRD data are well matched with the particle size measured from transmission electron microscopy images. The lattice parameters obtained from XRD data agree well with the values estimated from theoretical cation distribution and Rietveld refinement calculation. The hysteresis curve exhibits the particles are soft ferromagnetic and the coercivity increased from 54.7 to 76.6 kA/m with maximum saturation magnetization, Ms = 61 emug-1 for 0.10 Er content. The squareness ratios were found to be less than 0.5, which indicates the single-domain nature of our particles. The blocking temperature measured from field cooled-zero field cooled curves is TB > 350 K for all the samples, which is much higher than the room temperature (300 K). The enhancement of saturation magnetization and coercivity has been explained based on the crystallite size, anisotropy constant, and cation distribution. Thus, the structural and magnetic properties of CoFe2O4 nanoparticles (NPs) can be tuned by Er incorporation and these NPs can be applied in different soft magnetic devices.
In this research work Fe and Ni co-doped Tin oxide (SnO2) nanoparticles have been prepared by co-precipitation method. The samples were prepared at various combination of Fe and Ni from 0% up to 10%. The produced nanoparticles were studied by x-ray diffraction (XRD), Scanning Electron Microscopy (SEM), UV–vis Spectrophotometer, Fourier Transformation Infrared Spectroscopy (FTIR) and Vibrating Sample Magnetometer (VSM). The XRD study reveals the formation of rutile structure of the undoped and doped SnO2 nanoparticles with the average crystallite size of 1.5–10.8 nm. Metal oxide bonding is confirmed through FTIR measurement. Optical band gap redshift (3.9 to 3.64 eV) with doping of Fe and Ni atom is observed. SEM image confirms the formation of spheroidal nanoparticles and size of the nanoparticle varies from 36 to 15 nm. The VSM study shows the ferromagnetic phase transition at 7% Ni, Fe doped SnO2 nanoparticles. This ferromagnetism arises for the oxygen vacancies and defect states. Further, increase of doping concentration of 10%, nanoparticles show the phase transition from ferromagnetic to paramagnetic. Such transition can be applicable in hyperthermia treatment and memory devices.
Newly synthesized intermetallic compounds Ru4Al3B2 and Ru9Al3B8 are mechanically and dynamically stable, exhibit excellent transport properties and are suitable for thermal barrier coatings and absorber materials.