Jc Tsai

Prof. Jc Tsai


Research Focus & Metrics

Academic Career Length

28Years (1999-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 May 2016 in Measurement Science and Technology
Verified
Journal Article
Closed access
PDF file
YCYi-Ji Chen
Yi-Ji Chen
JTJc Tsai
Jc Tsai
YHYa-Chen Hsu
Ya-Chen Hsu
Precision steel balls are one of the most fundament components for motion and power transmission parts and they are widely used in industrial machinery and the automotive industry. As precision balls are crucial for the quality of these products, there is an urgent need to develop a fast and robust system for inspecting defects of precision steel balls. In this paper, a real-time system for inspecting surface defects of precision steel balls is developed based on machine vision. The developed system integrates a dual-lighting system, an unfolding mechanism and inspection algorithms for real-time signal processing and defect detection. The developed system is tested under feeding speeds of 4 pcs s −1 with a detection rate of 99.94% and an error rate of 0.10%. The minimum detectable surface flaw area is 0.01 mm 2 , which meets the requirement for inspecting ISO grade 100 precision steel balls.

7 July 2011 in International Journal of Production Research
Verified
Journal Article
Closed access
JTJc Tsai
Jc Tsai
CKC.-H. Kuo
C.-H. Kuo
Tolerance analysis of an assembly is an important issue for mechanical design. Among various tolerance analysis methods, statistical analysis is the most commonly employed method. However, the conventional statistical tolerance method is often based on the normal distribution. It fails to predict the resultant tolerance of an assembly of parts with non-normal distributions. In this paper, a novel method based on statistical moments is proposed. Tolerance distributions of parts are first transferred into statistical moments that are then used for computing tolerance stack-up. The computed moments, particularly the variance, the skewness and the kurtosis, are then mapped back to probability distributions in order to calculate the resultant tolerance of the assembly. The proposed method can be used to analyse the resultant tolerance specification for non-normal distributions with different skewness and kurtosis. Simulated results showed that tail coefficients of different distributions with the same kurtosis are close to each other for normalised probabilities between −3 and 3. That is, the tail coefficients of a statistical distribution can be predicted by the coefficients of skewness and kurtosis. Two examples are illustrated in the paper to demonstrate the proposed method. The predicted resultant tolerances of the two examples are only 0.5% and 1.5% differences compared with that by the Monte Carlo simulation for 1,000,000 samples. The proposed method is much faster in computation with higher accuracy than conventional statistical tolerance methods. The merit of the proposed method is that the computation is fast and comparatively accurate for both symmetrical and unsymmetrical distributions, particularly when the required probability is between ±2σ and ±3σ.

28 March 2011 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
KCKuo Ming Cheng
Kuo Ming Cheng
JTJc Tsai
Jc Tsai
This paper explores a systematic method for optimal statistical tolerance allocation using the Lagrange multiplier method for minimizing manufacturing cost subject to constraints on dimensional chains and machining capabilities. The reciprocal power and exponential cost-tolerance models for statistical tolerancing are investigated for employing this method. The optimization problem is solved by applying the algorithmic approach. Especially, we further derive a closed-form expression of the tolerance optimization problem for reciprocal exponential cost-tolerance model by introducing the Lambert W function. For constrained minimization problems with only equality constraints, the optimum tolerance allocation can be obtained by solving simultaneous equations without further differentiating. An example is illustrated to demonstrate this approach. The result also shows that tolerances can be allocated quickly, economically and accurately using this method.

6 September 2022 in Measurement
Verified
Journal Article
Closed access
JKJian-Dong Ke
Jian-Dong Ke
YWYu-Jen Wang
Yu-Jen Wang
JTJc Tsai
Jc Tsai

1 April 2011 in International Journal of Production Research
Verified
Journal Article
Closed access
CKChang-Hsin Kuo
Chang-Hsin Kuo
JTJc Tsai
Jc Tsai
This paper proposes an analytical solution for fast tolerance analysis of the assembly of components with a mean shift or drift in the form of a doubly-truncated normal distribution. The assembly of components with a mean shift or drift in the form of a uniform distribution (the Gladman model) can be calculated by this method as well since the uniform distribution is a special form of the doubly-truncated normal distribution. Integration formulae of the first four moments of the truncated normal distribution are first derived. The first four moments of the resultant tolerance distribution are then calculated. As a result, the resultant tolerance specification is represented as a function of the standard deviation and the coefficient of kurtosis of the resultant distribution. Based on this method, the calculated resultant tolerance specification is more accurate than that predicted by the Gladman's model or the simplified truncated normal model. The difference between this model and the Monte Carlo method with 1,000,000 simulation samples is less than 0.5%. The merit of the proposed method is that it is fast and accurate which is crucial for engineering applications in tolerance analysis.

25 May 2018 in MATEC Web of Conferences
Verified
Journal Article
Open access
JTJc Tsai
Jc Tsai
CKChung-Yu Kuo
Chung-Yu Kuo
ZLZing-Ping Liu
Zing-Ping Liu
KHKelvin Hsi-Hung Hsiao
Kelvin Hsi-Hung Hsiao
Inconel alloy has been widely used in industry but is difficult to machine due to its rapid change in cutting force during machining. This paper investigated the cutting force for milling Inconel 718 as conventional force model is unable to handle the above situation. Theorectical force model is first reviewed and two-phase experiments of slot milling based on dry cutting are designed to measure the cutting force and the specific cutting force. Experiments in phase I are designed based on Taguchi method with spindle speed, feedrate per cutting edge and depth of cut as experimental parameters. The results showed that the first two parameters play more important roles in the cutting force. A phase II exhaust experiments is designed with spindle speed set from 400 to 800 rpm while the feedrate per cutting edge is set from 0.04 to 0.08 mm/tooth. The results are concluded as the following. (i) There exists a strong size effect in milling Inconel 718 as the cutting force changed with the chip thickness. Specific cutting force is larger at small thickness of cut and become smaller when the thickness increases. (ii) A 2nd order non-linear cutting force model, which takes spindle speed N and feedrate fz into account, for milling Inconel 718 is derived from the measured data and represented as Ft(N, fz )= (13910 -3.1N - 109900fz - 0.0028N2 +23.9Nfz+434500fz 2) xapxh. The derived force model compensates the inaccuracy of conventional force model.