In in vivo postsurgery monitoring, the use of wireless biodegradable implantable sensors has gained and is gaining a lot of interest, particularly in cases of monitoring for a short period of time. The employment of biodegradable materials allows the circumvention of secondary surgery for device removal. Additionally, the use of wireless communication for data elaboration avoids the need for transcutaneous wires. As such, it is possible to prevent possible inflammation and infections associated with long-term implants which are not wireless. It is expected that microfabricated biodegradable sensors will have a strong impact in acute or transient biomedical applications. However, the design of such high-performing electronic systems, both fully biodegradable and wireless, is very complex, particularly at small scales. The associated technologies are still in their infancy and should be more deeply and extensively investigated in animal models and, successively, in humans, before being clinically implemented. In this context, the present review aims to provide a complete overview of wireless biodegradable implantable sensors, covering the vital signs to be monitored, the wireless technologies involved, and the biodegradable materials used for the production of the devices, as well as designed devices and their applications. In particular, both their advantages and drawbacks are highlighted, and the key challenges faced, mainly associated with fabrication techniques, and control over degradation kinetics and biocompatibility of the device, are reported and discussed.

This article addresses the problem of optimizing voltage profiles in distribution networks. The voltage optimization is split into two stages; the former is performed offline and the latter online. First, the network is partitioned into several weakly coupled voltage control zones (VCZs) with pilot nodes (PNs). Then, the partitioning is used to optimize the voltage profiles of the distribution systems on the frame of a two time-scale-based coordinated approach. At the first level, a centralized voltage optimization problem (VOP), minimizing the distance of bus voltages at the PNs from their reference values and subject to linearized power flow equations, is solved to fix the positions of the on-load tap changer and of step-voltage regulators, and the reactive powers provided by capacitor banks. At the second level, the VOP is implemented according to a decentralized approach, in which the solution is obtained by applying a distributed algorithm based on the alternating direction method of multipliers. It optimizes in each VCZ the voltage at the PN by acting on the active and reactive powers provided by the distributed energy resources present in the VCZ; the VCZ solutions are driven to the global optimum of the whole distribution system by a limited data exchange between the PNs. The proposed approach reduces the complexity and computational burden typical when solving the VOP on a large scale system. The proposed strategy is tested on the modified IEEE 123-bus system; various load and generation scenarios are analyzed proving the effectiveness of the proposed approach in achieving the objective of voltage regulation.

This paper deals with the problem of the voltage profile optimization in a distribution system including distributed energy resources. Adopting a centralized approach, the voltage optimization is a non-linear programming problem with large number of variables requiring a continuous remote monitoring and data transmission from/to loads and distributed energy resources. In this study, a recently-proposed Jacobian-based linear method is used to model the steady-state operation of the distribution network and to divide the network into voltage control zones so as to reformulate the centralized optimization as a quadratic programming of reduced dimension. New clustering methods for the voltage control zone definition are proposed to consider the dependence of the nodal voltages on both active and reactive powers. Zoning methodologies are firstly tested on a 24-nodes low voltage network and, then, applied to the voltage optimization problem with the aim of analyzing the impact of the R/X ratios on the zone evaluation and on the voltage optimization solution.

Voltage control is becoming a key issue in active distribution systems, which are electric distribution networks characterized by a large penetration of DERs. Traditional voltage control devices, as well as the active and reactive powers injected by DERs, can be used as ancillary services to support voltage profiles along the distribution feeders. Due to the peculiar characteristics of active distribution systems, the decentralized control approach presents the most promising technical and economical features. In the paper, the decentralized voltage control structure is hierarchically decomposed into different control levels, characterized by different objectives and time frames. The primary and secondary control levels have been analyzed, always according to a decentralized approach. For each level, the various techniques for solving the voltage control problem that have been proposed in the literature are presented, and their main features compared. The main open issues related to the real time practical implementation of the decentralized architectures at both primary and secondary voltage control levels are investigated, keeping always in mind both technical and economical aspects, which always represent the components of a trade-off solution.