The development of rotary actuators is an important aspect of the engineering applications of shape memory alloys. This article reviews about a hundred references on this topic, and presents around eighty actuators driven by shape memory alloys. A classification is made according to the type of rotation (continuous or non-continuous, single or reversible direction). Different factors are then discussed, such as the characteristics of the shape memory alloy elements, the heating and cooling system for the shape memory alloy, the control of the actuator, and the output torque and stroke which can be attained. This article provides the first review focused on rotary actuators triggered by shape memory alloys, highlighting the specificities and potentialities of such actuators for new applications in the future.
10 December 2021 in Shape Memory and Superelasticity
In line with the recent development of soft actuators involving shape-memory alloys (SMAs) embedded in compliant structures, this paper proposes a concept for a rotary actuator driven by a SMA wire placed inside a 3D-printed helical structure. The concept consists of using the one-way memory effect of the SMA (activated by Joule heating) to create the rotation of a material point of the structure, while the inverse rotation is obtained during the return to ambient temperature thanks to the structure’s elasticity. The study was performed in three steps. First, a prototype was designed from a chain of design rules, and tested to validate the feasibility of the concept. Thermal and geometrical measurements were performed using infrared and visible-range stereo cameras. A clockwise rotation (250°) followed by an anti-clockwise rotation (−200°) were obtained, enabling us to validate the concept despite the partial reversibility of the movement. Second, finite element simulations were performed to improve rotation reversibility. The high compliance of the mechanical system required a framework of large displacements for the calculations (in the strength of materials sense), due to the high structural flexibility. Finally, a second prototype was constructed and tested. Attention was paid to the rotation (fully reversible rotation of 150° reached) as well as to parasitic movements due to overall structural deformation. This study opens new prospects for the design and analysis of 3D-printed soft actuators activated by smart materials.
This work deals with the identification of hyperelastic constitutive parameters using the virtual fields method. The choice of the virtual displacement fields is a crucial aspect of the method, typically for reducing the sensitivity to the measurement noise. A first and simple option is to generate the virtual displacement fields randomly. Nevertheless, in case of hyperelastic models for which the stress is not a linear function of the constitutive parameters, improving the choice of the virtual displacement fields is not trivial and an alternative strategy has to be found. In the present study, the sensitivity‐based virtual fields approach is applied and compared with the randomly generated virtual displacement fields approach. Two material models were considered: the Mooney model, which describes quite well the behavior of hyperelastic materials for small and moderate strains, and the Ogden model, which accounts for the stress hardening phenomenon observed at higher strains. The full kinematic fields are measured by using the digital image correlation technique during an equibiaxial tensile test performed on a cruciform specimen. Identification results are discussed through their capability to predict the external force measured during the test. The sensitivity‐based virtual fields approach is found to improve significantly the prediction compared with the randomly generated virtual displacement fields approach.