As a two-dimensional planar material with low depth profile, a metasurface can generate non-classical phase distributions for the transmitted and reflected electromagnetic waves at its interface. Thus, it offers more flexibility to control the wave front. A traditional metasurface design process mainly adopts the forward prediction algorithm, such as Finite Difference Time Domain, combined with manual parameter optimization. However, such methods are time-consuming, and it is difficult to keep the practical meta-atom spectrum being consistent with the ideal one. In addition, since the periodic boundary condition is used in the meta-atom design process, while the aperiodic condition is used in the array simulation, the coupling between neighboring meta-atoms leads to inevitable inaccuracy. In this review, representative intelligent methods for metasurface design are introduced and discussed, including machine learning, physics-information neural network, and topology optimization method. We elaborate on the principle of each approach, analyze their advantages and limitations, and discuss their potential applications. We also summarize recent advances in enabled metasurfaces for quantum optics applications. In short, this paper highlights a promising direction for intelligent metasurface designs and applications for future quantum optics research and serves as an up-to-date reference for researchers in the metasurface and metamaterial fields.

Vortex beams have been extensively realized using different approaches. Typically, the efficiency and bandwidth of a vortex beam are limited by impure copolarized components and the intrinsic dispersion of passive resonant structures. Here, we propose a strategy to generate wideband vortex beams by using a Pancharatnam–Berry metasurface in which two orthogonal reflections exhibit a broadband out-of-phase difference. To achieve this, a broadband strategy based on multimode operation and dispersion engineering methods was established. A dual-layer meta-atom is proposed; each layer comprises of five metallic dipoles, and the geometrical parameters are carefully adjusted to tune the resonant frequencies. Because the dipole orientations in each layer are orthogonal, the reflection responses under the two orthogonal polarizations can be independently engineered. Both numerical and experimental results indicate that our method not only enables a high-efficiency spiral beam conversion over a broad range of 6.95–18 GHz (>82%) but also causes a polarization-insensitive effect; thus, it can be adapted for any linear or circular polarization.

Electromagnetic metasurface cloaks provide an alternative paradigm toward rendering arbitrarily shaped scatterers invisible. Most transformation-optics (TO) cloaks intrinsically need wavelength-scale volume/thickness, such that the incoming waves could have enough long paths to interact with structured meta-atoms in the cloak region and consequently restore the wavefront. Other challenges of TO cloaks include the polarization-dependent operation to avoid singular parameters of composite cloaking materials and limitations of canonical geometries, e.g., circular, elliptical, trapezoidal, and triangular shapes. Here, we report for the first time a conformal-skin metasurface carpet cloak, enabling to work under arbitrary states of polarization (SOP) at Poincaré sphere for the incident light and arbitrary conformal platform of the object to be cloaked. By exploiting the foundry three-dimensional (3D) printing techniques to fabricate judiciously designed meta-atoms on the external surface of a conformal object, the spatial distributions of intensity and polarization of its scattered lights can be reconstructed exactly the same as if the scattering wavefront were deflected from a flat ground at any SOP, concealing targets under polarization-scanning detections. Two conformal-skin carpet cloaks working for partial- and full-azimuth plane operation are respectively fabricated on trapezoid and pyramid platforms via 3D printing. Experimental results are in good agreement with numerical simulations and both demonstrate the polarization-insensitive cloaking within a desirable bandwidth. Our approach paves a deterministic and robust step forward to the realization of interfacial, free-form, and full-polarization cloaking for a realistic arbitrary-shape target in real-world applications.

Achieving simultaneous polarization and wavefront control, especially circular polarization with the auxiliary degree of freedom of light and spin angular momentum, is of fundamental importance in many optical applications. Interferences are typically undesirable in highly integrated photonic circuits and metasurfaces. Here, we propose an interference-assisted metasurface-multiplexer (meta-plexer) that counterintuitively exploits constructive and destructive interferences between hybrid meta-atoms and realizes independent spin-selective wavefront manipulation. Such kaleidoscopic meta-plexers are experimentally demonstrated via two types of single-layer spin-wavefront multiplexers that are composed of spatially rotated anisotropic meta-atoms. One type generates a spin-selective Bessel-beam wavefront for spin-down light and a low scattering cross-section for stealth for spin-up light. The other type demonstrates versatile control of the vortex wavefront, which is also characterized by the orbital angular momentum of light, with frequency-switchable numbers of beams under linearly polarized wave excitation. Our findings offer a distinct interference-assisted concept for realizing advanced multifunctional photonics with arbitrary and independent spin-wavefront features. A variety of applications can be readily anticipated in optical diodes, isolators, and spin-Hall meta-devices without cascading bulky optical elements.

A novel triple-layer dual-mode meta-atom wherein an H-shaped structure is combined with a pair of symmetric patches is proposed. The composite structure substantially lowered the operation frequency, and balanced phase agility with transmission magnitude bandwidth. The transmission phase limit of the proposed composite structure approaches the theoretical limit. Because this structure has appealing features, we employed a set of these ultrathin meta-atoms to implement the phase distribution of an optimized array using the alternating projection method. An X-band single-feed quad-beam transmitarray consisting of 25×25 elements, each carefully designed to exhibit the desired transmission phase, was designed, simulated, physically implemented, and measured. Feeding the meta-array using a horn at its focus, four-beam radiation patterns with satisfactory sidelobe levels and gain were numerically and experimentally demonstrated. The peak gain was found to be 18.8 dB at 9.6 GHz, and the aperture efficiency was calculated as 38.3%. Moreover, the half-power beamwidth of the array antenna was approximately 7°, which was 50° narrower than that of a bare feed horn. Moreover, the gain of each beam was higher than 17 dB in all studied cases, which was at least 7 dB higher than that of a bare feed horn.