The research is aimed at developing the methods of reduction of the anthropogenic impact of cadmium on the hydrosphere of the mining region. To reduce the entry of cadmium into the hydrosphere, it is necessary to purify acidic mine waters and carry out the post- treatment of waste waters after lime treatment. For the post-treatment, the most practical is the method of sorption. Hollow glass microspheres, ceramic microspheres, metakaolin and microsilicon dioxide were studied as sorbents. Sorption isotherms are obtained and their mathematical description is made. The specific adsorption of cadmium varies from 0.58 to 0.12 mmol/g. The time to achieve sorption equilibrium in the sorbent-salt solution system is not less than 40 min. The most effective adsorption of cadmium is observed when using hollow glass microspheres. There is a potential use of hollow glass microspheres for the removal of cadmium from waste waters in the broad range of pH values.
Hydromineral resources, such as the underground brines from oil and gas fields, are a promising source for the extraction of strategic metals, particularly lithium, as well as other valuable products like magnesium and calcium salts. To improve the efficiency of selective extraction of valuable components from hydromineral raw materials, this study investigates the potential for reducing the concentration of macrocomponents during the initial stages of the processing workflow. Chemical analysis of brines from various oil and gas fields in the Irkutsk region revealed their high mineralization, driven by the presence of calcium, magnesium, potassium, and sodium chlorides, alongside significant concentrations of microcomponents such as lithium (Li) and strontium (Sr). The phase composition of the raw underground brines, primarily consisting of tachyhydrite and sinjarite, was examined, along with post-precipitation product samples, which contained substantial amounts of strontium chloride hydrate. The study demonstrates the feasibility of separating brine components by transferring the majority of calcium, potassium, and iron into the precipitate. The parameters influencing the precipitation process and their effect on the quality of the resulting products were established. Subsequent sorption extraction of lithium and ion-exchange purification of the primary lithium concentrate enabled the production of a lithium-containing product with minimal impurities, achieving over 86 % lithium recovery. As a result, the concentration of major macrocomponents in the primary lithium concentrate was significantly reduced compared to the original brine: calcium to 0.18 % by weight, potassium to 15 % by weight, magnesium to 0.19 % by weight, and iron (II) to less than 0.02 % by weight.
1 January 2017 in IOP Conference Series: Earth and Environmental Science
The acid mine dump waters at mining companies that mining the copper and copperzinc sulphide ore have the high concentrates of metals and classified in our view as the raw materials for selective recovery of metals in precipitates comparable in quality with concentrates of ores enrichment and suitable for further metallurgical processing. Authors have implemented three two-stage schemes for sequential extraction of copper and zinc: cementation-sulphide precipitation, galvanocoagulation-sulphide precipitation, precipitation-precipitation. Moreover, parameters of processes and quality of the obtained precipitates have described. The achieved copper recovery is 89% and 94% respectively with the application of cementation and galvanocoagulation, in sulphide precipitate exceeded 75%. Furthermore, the copper recovery from decoppering in precipitates amounted to more than 65%. Zinc-containing precipitates because of coprecipitation of iron, magnesium and calcium contain zinc from 14% to 28%, in two to three times less than the quality of conditioned zinc concentrates. The content of precipitates allows to apply them for additional charging to concentrates of enrichment or for the production of metals in metallurgical treatment. As a result of the studying the effect of reduced total salinity (S) on mass fraction of zinc in precipitate (β) with the constant concentration of zinc (SZn), the changes in concentration with constant salinity and reduction in total salinity (S) with constant ratio S/CZn, the following dependencies have obtained: 0,{\left( {{{\partial \beta } \over {\partial S}}} \right)_{{C_{Zn}}}} < 0$" src="http://cdn.iopscience.com/images/1755-1315/52/1/012083/EES_52_1_012083_eqn_001.gif">, in the range of an index S from 4.5 to 90.0 g/L <img xmlns:m="http://ns.iop.org/namespaces/meta" align="MIDDLE" alt="${\left( {{{\partial \beta } \over {\partial S}}} \right)_{{{{C_{Zn}}} \over S}}} < 0$" src="http://cdn.iopscience.com/images/1755-1315/52/1/012083/EES_52_1_012083_eqn_002.gif">, where is a partial derivative of x to y, whereas the value z is fixed.