The exhaustive nature of petroleum products triggers the obstacles of scarcity, economic imbalance, and environmental depletion. It is difficult to avoid their usage all of a sudden and switch to clean electric prime movers. Under all these circumstances, the researchers may initiate their investigations on alternative fuels for preeminent solution. The present study covers the performance and emissions of a single cylinder, four‐stroke, diesel engine fueled with Pongamia pinnata and Calophyllum inophyllum biodiesels added with n‐butanol additive at various proportions. In this investigation, the piston has been coated with ceramic material with a thickness of 200 µm topcoat. The blends have been tested at 1500 rpm speed and rated compression ratio of 17.5 : 1 at various operating loads. A comparative result analysis has been made on the engine parameters operated by diesel and showed that mechanical efficiency gradually increases with a percentile increment of n‐butanol in the blend. Moreover, emissions such as CO, CO2, NOx, and opacity were found to be reduced for the samples having high amount of n‐butanol, whereas HC emissions slightly increased. In addition, all the exhaust gases have been predicted by using second‐order polynomial equations generated and artificial Intelligence technique, and the comparative analysis has been made. It has been identified that ANN showed an average accuracy of prediction superior than regression analysis.
This paper explores the design and implementation of a solar-powered water pumping system that utilizes a Brushless DC (BLDC) motor, with an Artificial Neural Network (ANN) employed for Maximum Power Point Tracking (MPPT). The extensive absence of grid connected agricultural areas in Ethiopia created a problem—water pumping with traditional motors is almost impossible, greatly reducing the productivity of agriculture and hence food security. In order to solve this problem, a photovoltaic (PV) based water pumping system has been proposed as a sustainable and efficient solution. The system comprises several key components, including a Solar Photovoltaic (SPV) array, a Zeta converter, a Voltage Source Inverter (VSI), and a BLDC motor, all working together to efficiently power a positive displacement pump. The SPV array generates electrical energy, which is then regulated by a Zeta converter to step up the voltage to 48 V, suitable for operating the BLDC motor. To ensure optimal power generation even under changing sunlight conditions, the ANN-MPPT algorithm dynamically adjusts the system for maximum efficiency. The VSI, guided by electronic commutation signals from Hall sensors, drives the BLDC motor, ensuring smooth and efficient operation. This system is designed with off-grid agricultural areas in mind, offering a dependable and eco-friendly solution for irrigation needs. Its versatility makes it suitable for a range of applications, including both domestic and agricultural uses, especially in remote locations. The proposed PV based water pumping system produced a peak power output of 410 W and maintained a stable motor speed of 2500 rpm, which is better than the traditional methods. The ANN based MPPT algorithm showed better efficiency with minimal power losses and faster system stabilization in 0.5 s. The results of this system show that it is reliable and effective in solving water pumping problems in off grid areas. The paper also includes an analysis of Ethiopia’s agricultural economy, emphasizing the country's key export products and reliance on imported food. By combining the efficiency of the ANN algorithm with real-time adaptability, the system provides a reliable and sustainable water-pumping solution, making it particularly valuable for off-grid agricultural regions.
By using novel surface passivation techniques (plasma nitridation, AlN-passivation) on GaAs, we demonstrate GaAs p- and n-MOS devices integrated with ALD-HfO2/TaN gate stack. Results show that robust passivation layers can be achieved at HfO2/GaAs interface, leading to good C-V characteristics on both n- and p-type GaAs with low leakage current. It is also found that GaAs MOS devices with plasma nitridation and AlN-passivation show higher thermal-stability than Si-passivated devices
This paper presents the study on the effect of low k stacked layer, chip pad design structures, and shift pad design TM of a large die size Cu/low kappa (BDtrade) chip for improving assembly and reliability performance on organic buildup substrate FCBGA (FlipChip ball grid array). Bump shear characterization has been performed on the integrity of different stacked layer and pad structure, supported by bump shear modeling analysis. Initial reliability testing was performed on assembled package to identify the best choice of design and finally implemented on the reliability test vehicle for verification. In addition, a potential chip crack problem due to excessive warpage in FCBGA with large die assembly is examined and a simple failure criterion is proposed.
1 January 2005 in Electrochemical and Solid-State Letters
Voltage stability and line losses are inevitable issues even in modern power systems. There are several techniques that emerged to solve problems in the power system to provide quality and uninterrupted supply to customers. The algorithms used in this paper to determine the appropriate location and size of the Static Var Compensator (SVC) in the Distribution Network (DN) are Moth Flame Optimization (MFO) and Particle Swarm Optimization (PSO). The objective function is defined to minimize voltage deviation and power loss. The burning problem of voltage stability improvement current scenario is because of a rise in electricity demands in all sectors. Paramount duties of power engineers are to keep the system stable and maintain voltage magnitude constant even during peak hours. The results were checked with the aid of MATLAB on Wolaita Sodo radial distribution of 34 bus data networks. The potential use of SVC is key to solve distribution system power quality issues and estimating the advantage of the installation. The results obtained from the test system were compared with PSO results. This comparison was done to know the computational time of proposed techniques. The performance of the MFA based SVC was superior in distribution system and highlighted the importance of device.