Having the advantages of high permeability and high strength, pervious concrete is suitable for improving ground-bearing capacity. In the Yellow River Delta, a pervious concrete pile (PCP) composite foundation has been constructed to reduce settlement of an expressway embankment. To study the working mechanism of PCPs, a numerical model was constructed based on the finite-difference method and Biot’s consolidation theory, which was validated by data from in situ tests. The excess pore-water pressure, pile–soil stress ratio, lateral displacement, and settlement of the PCP composite foundation under the loading of the road embankment were numerically calculated and compared with those of gravel pile and low-grade concrete pile composite foundations. Comparisons show that the dissipation of excess pore-water pressure in the PCP composite foundation was fastest, which implied that PCPs can significantly mitigate the development of excess pore-water pressure and thus enhance subsoil strength. Furtherm...
The deterioration of soil-cement in a saline environment leads to a reduction in strength and an increase in permeability. Effective methods of determining the deteriorated layer permeability coefficient of soil-cement are currently lacking. A laboratory test method for measuring the permeability coefficient of the deteriorated layer was proposed using the modified permeability coefficient testing apparatus. According to the proposed method, the permeability coefficient of the deteriorated layer could be obtained after testing the permeability coefficient of the soil-cement specimen in acuring room and testing the equivalent permeability coefficient and deterioration depth of the soil-cement specimen in a deteriorated environment. Using the marine dredger fill from Jiaozhou Bay as a case study, the deteriorated layer permeability coefficients of soil-cements with different cement contents were tested. It turned out that the permeability of the deteriorated layer increases with age. At the beginning of the curing age, higher cement content led to a smaller permeability coefficient of the deteriorated layer of soil-cement. As the curing age increased, the deteriorated layer permeability coefficient of the soil-cement with higher cement content increased. The evolution of the permeability coefficient of a deteriorated layer with age can be formulated as the Logistic function. This study provides support for anti-permeability designs of soil-cement structures in saline environments.
Cement-sodium silicate grout (CSG) is now widely adopted in water plugging engineering to prevent water inrush disasters, and the gelation and consolidation characteristics of CSG in water environment significantly affect the grouting effect. To obtain an in-depth understanding of the performance of CSG in water, the CSGs with different water-cement ratios and volume ratios were tested, and the gelation properties, the deposition characteristics and the diffusion process of CSG within water were examined. The compressive strength and microstructure of CSG consolidation formed in air and water were also analyzed comparatively. The test results indicate that the CSG consolidation exhibits obvious stratification and segregation phenomena in water, which can be divided into three layers with different substance compositions. The compressive strength of CSG consolidation formed in water is much lower than that of the grout consolidation formed in air, indicating that the water environment has a significant weakening effect on the consolidation properties of CSG. The hydration products and microstructure of CSG consolidation in water change clearly due to the dilution effect of water.
21 July 2022 in Geotechnical and Geological Engineering
Insufficient utilization of industrial solid waste and the high carbon emissions caused by the use of cement in engineering construction are two challenges faced by China. This study aimed to develop a multi-source industrial solid waste cementitious material (MSWC) for fluidized solidified soil (FSS) in soil backfill projects. First, the response surface models for the unconfined compressive strength (UCS) of MSWC-FSS were established, and the optimal mixing ratio of MSWC was determined. Subsequently, laboratory tests were conducted to compare the differences in flow expansion, UCS, and dry shrinkage between MSWC and ordinary Portland cement (OPC) in FSS, and the feasibility of MSWC-FSS was verified through on-site tests. Finally, the curing mechanism of MSWC-FSS was analyzed by XRD and SEM. The results showed that MSWC had an optimal mix ratio: steel slag (SS): ground granulated blast-furnace slag (GGBS): circulating fluidized bed fly ash (CFBFA): flue gas desulfurization gypsum (FGDG): OPC = 20:40:15:5:20. MSWC-FSS had good flow expansion, and its UCS and drying shrinkage resistance were more than 10% better than OPC-FSS. The on-site test also proved the practicability and progressiveness of MSWC-FSS. According to the chemical composition and microstructure, MSWC-FSS generated more ettringite than OPC-FSS, making MSWC-FSS denser.
The permeability coefficient is the foundation of evaluating the clogging and maintenance. In this study, 384 field tests were carried out on 9 positions using single-ring and double-ring permeameters with different diameters. Both falling head and constant head methods were evaluated. At the same time, core samples were drilled from the 9 test positions, and their permeability coefficients were measured in the laboratory. The results show that there is a good correlation between falling head method and constant head method, both of them can be used to measure in-situ permeability coefficient of pervious pavement. Although the double-ring method can reduce the transverse seepage inside the pavement, the effect of double-ring permeameters with different cylinder diameters is different, and permeameters with larger cylinder diameters are better. For sites with permeability greater than 2 mm/s, it is not recommended to use permeameters with small cylinder diameters..