In this paper a lumped element model of RF MEMS capacitive switches which is scalable with the lateral dimensions of the bridge is proposed. The dependence of the elements of the model on the bridge dimensions is introduced by using one or more artificial neural networks to model the relationship between the bridge dimensions and the inductive and resistive elements of the lumped element model. The achieved results show that the developed models have a good accuracy over the whole considered range of the bridge dimension values.
1 January 1997 in IEEE Transactions on Microwave Theory and Techniques
Artificial neural networks (ANNs) have appeared to be an alternative to the conventional models of RF MEMS switches. In this paper, neural models of an RF MEMS capacitive switch are developed and used for the electrical design of the switch. Namely, an ANN model relating the switch resonant frequency and the bridge dimensions is used to analyze efficiently the switch behavior with changes of bridge dimensions. Furthermore, it is illustrated how the developed model can be used for the determination of bridge dimensions in order to achieve the desired switch resonant frequency. In addition, application of a switch inverse ANN model for the determination of bridge dimensions is analyzed as well.
This work presents concepts and designs for two essential components of a frequency agile transmit and receive module based on Radio Frequency Micro Electro Mechanical System (RF MEMS) switches for the frequency range from 3.5 GHz up to 8.5 GHz. The advantages of a variable power amplifier (PA) matching compared to a fixed broadband solution are examined and discussed in context with the designed components. To demonstrate the principle functionality, an assembly concept is presented, which allows for the integration of a frequency agile 6 W power amplifier with surrounding components like phase shifters, switches and antennas. An RF MEMS switching element is introduced as a high isolation polarization switch, featuring low insertion loss as well as almost no DC power consumption.
This paper reports on the successive improvements introduced in the shunt switches fabricated with the RF MEMS multiuser technology platform available at FBK-irst. In the course of a multiyear development several technological features and design methods have been made available to enhance the operation of capacitive switches. This work analyzes their effects by reviewing the behaviour of the FBK-irst capacitive switches at three different stages of this optimization process. Improvements have been assessed by means of DC electromechanical characterizations, which use a simple quasistatic C-V measurement to extract the switch actuation voltage and the capacitance in the on and off states (Con and Coff) and RF measurements. The addition of a floating metal layer into the process flow has allowed a great increase of the switch on state capacitances, getting Con/Coff ratios of 200, up to 50 times greater than the ones obtained for the same structures without this feature.