The design, simulation, realization, and measurement of an ultra-wideband (UWB) antenna on a polymeric substrate have been realized. The UWB antenna was prepared using conventional technology, such as copper etching; inkjet printing, which is regarded as a modern and progressive nano-technology; and polymer thick-film technology in the context of screen-printing technology. The thick-film technology-based UWB antenna has a bandwidth of 3.8 GHz, with a central frequency of 9 GHz, and a frequency range of 6.6 to 10.4 GHz. In addition to a comparison of the technologies described, the results show that the mesh of the screens has a significant impact on the quality of the UWB antenna when utilizing polymeric screen-printing pastes. Last but not least, the eco-friendly combination of polyimide substrate and graphene-based screen-printing paste is thoroughly detailed. From 5 to 9.42 GHz, the graphene-based UWB antenna achieved a bandwidth of 4.42 GHz. The designed and realized UWB antenna well exceeds the Federal Communications Commission’s (FCC) standards for UWB antenna definition. The modification of the energy surface of the polyimide substrate by plasma treatment is also explained in this paper, in addition to the many types of screen-printing pastes and technologies. According to the findings, plasma treatment improved the bandwidth of UWB antennas to 5.45 GHz, and the combination of plasma treatment with graphene provides a suitable replacement for traditional etching technologies. The characteristics of graphene-based pastes can also be altered by plasma treatment in terms of their usability on flexible substrates.

Purpose: The purpose of this paper is to analyse the possibilities of mechanical switch replacement by capacitive film touch sensor in applications requiring high reliability and short response time. Advantage of replacing mechanical switch by capacitive touch sensor is no mechanical wear and possible implementation of sensor in application where the switch could not be used or where the flexibility of the sensor substrate is required. The aim of this work is to develop a capacitive touch sensor with the advantage of maximum mechanical resistance, short response time and high sensitivity. Design/methodology/approach: Based on various possible sensors layouts, the authors realized 18 different (14 self-capacitance and four mutual capacitance) topologies of capacitive sensor for touch applications. Three different technologies – PCB, LTCC and polymer technology – were used to characterize sensor’s behaviour. For precise characterization of different layouts realized on various substrates, the authors used integrated circuit FDC2214 capacitance-to-digital converter. Findings: Sensing range of the capacitive touch (proximity) sensor is affected by the per cent of area covered by the sensor, and it does not depend on topology of sensor. The highest sensing range offers PCB technology. Flexible substrates can be used as proper substituent to rigid PCB. Originality/value: The novelty of this work lies in finding the touch capacitive sensors that allow shorter switching times compared to standard mechanical switches.

Purpose: – The purpose of this paper is to consider the adequacy of various microstrip filters’ behaviour based on different low-temperature co-fired ceramic (LTCC) dielectrics in the high frequency (HF) area up to 13 GHz. Design/methodology/approach: – Low pass, band pass and band stop filters for ultra-wideband radar systems were designed, simulated, fabricated and measured using three various dielectric substrates: Dupont GreenTape 951, Dupont GreenTape 9K7 and Murata LFC. Findings: – It is not possible to unambiguously determine the most suitable LTCC dielectric for these filter design because, in general, all designed filters fulfilled requirements (attenuation, cut off frequencies) with minimal divergences, but temperature-stable dielectric and physical properties of Murata LFC make them a promising ceramic for HF application (repeatability of realised experiments). Originality/value: – The novelty of this work lies in unconventional usage of LTCC as material with defined dielectric properties proper for HF applications.

In this paper, characterization of sensitive contact-less coplanar capacitive liquid level sensors realized by polymer thick film technology is presented. It was found out that polymer thick film coplanar capacitive sensors are suitable for use in liquid level sensing application realized by contactless sensing method. Principle of measurement by using contact-less capacitive sensing method and performance of realized liquid level sensors are described in this paper. Design optimization of various geometric dimension of comb sensor structures was compared and analyzed for easy construction of very sensitive contact-less coplanar capacitive liquid level sensor. Thick film coplanar capacitive sensor is suitable, cost effective and reusable alternative for contact-less level measurement of various liquids with different dielectric constant.

LTCC Based Planar Inductive Proximity Sensor Design