In recent years, the development of energy storage devices has received much attention due to the increasing demand for renewable energy. Supercapacitors (SCs) have attracted considerable attention among various energy storage devices due to their high specific capacity, high power density, long cycle life, economic efficiency, environmental friendliness, high safety, and fast charge/discharge rates. SCs are devices that can store large amounts of electrical energy and release it quickly, making them ideal for use in a wide range of applications. They are often used in conjunction with batteries to provide a power boost when needed and can also be used as a standalone power source. They can be used in various potential applications, such as portable equipment, smart electronic systems, electric vehicles, and grid energy storage systems. There are a variety of materials that have been studied for use as SC electrodes, each with its advantages and limitations. The electrode material must have a high surface area to volume ratio to enable high energy storage densities. Additionally, the electrode material must be highly conductive to enable efficient charge transfer. Over the past several years, several novel materials have been developed which can be used to improve the capacitance of the SCs. This article reviews three types of SCs: electrochemical double-layer capacitors (EDLCs), pseudocapacitors, and hybrid supercapacitors, their respective development, energy storage mechanisms, and the latest research progress in material preparation and modification. In addition, it proposes potentially feasible solutions to the problems encountered during the development of supercapacitors and looks forward to the future development direction of SCs.

Zinc–air batteries (ZABs) are gaining attention as an ideal option for various applications requiring high-capacity batteries, such as portable electronics, electric vehicles, and renewable energy storage. ZABs offer advantages such as low environmental impact, enhanced safety compared to Li-ion batteries, and cost-effectiveness due to the abundance of zinc. However, early research faced challenges due to parasitic reactions at the zinc anode and slow oxygen redox kinetics. Recent advancements in restructuring the anode, utilizing alternative electrolytes, and developing bifunctional oxygen catalysts have significantly improved ZABs. Scientists have achieved battery reversibility over thousands of cycles, introduced new electrolytes, and achieved energy efficiency records surpassing 70%. Despite these achievements, there are challenges related to lower power density, shorter lifespan, and air electrode corrosion leading to performance degradation. This review paper discusses different battery configurations, and reaction mechanisms for electrically and mechanically rechargeable ZABs, and proposes remedies to enhance overall battery performance. The paper also explores recent advancements, applications, and the future prospects of electrically/mechanically rechargeable ZABs.

The review provides the recent progress of flexible solid-state hybrid supercapacitors for portable and wearable energy storage devices in terms of design and performance with their state-of-the-art commercialized products for IoE applications.

With the rapid growth in demand for effective and renewable energy, the hydrogen era has begun. To meet commercial requirements, efficient hydrogen storage techniques are required. So far, four techniques have been suggested for hydrogen storage: compressed storage, hydrogen liquefaction, chemical absorption, and physical adsorption. Currently, high-pressure compressed tanks are used in the industry; however, certain limitations such as high costs, safety concerns, undesirable amounts of occupied space, and low storage capacities are still challenges. Physical hydrogen adsorption is one of the most promising techniques; it uses porous adsorbents, which have material benefits such as low costs, high storage densities, and fast charging–discharging kinetics. During adsorption on material surfaces, hydrogen molecules weakly adsorb at the surface of adsorbents via long-range dispersion forces. The largest challenge in the hydrogen era is the development of progressive materials for efficient hydrogen storage. In designing efficient adsorbents, understanding interfacial interactions between hydrogen molecules and porous material surfaces is important. In this review, we briefly summarize a hydrogen storage technique based on US DOE classifications and examine hydrogen storage targets for feasible commercialization. We also address recent trends in the development of hydrogen storage materials. Lastly, we propose spillover mechanisms for efficient hydrogen storage using solid-state adsorbents.

Numerous challenges, like the uninterrupted supply of electricity, stable and reliable power, and energy storage during non‐operational hours, arise across various industries due to the absence of advanced energy storage technologies. With the continual technological advancements in portable electronics, green energy, and transportation, there are inherent limitations in their innovative production. Thus, ongoing research is focused on pursuing sustainable energy storage technologies. An emerging solution lies in the development of asymmetric supercapacitors (ASCs), which offer the potential to extend their operational voltage limit beyond the thermodynamic breakdown voltage range of electrolytes. This is achieved by employing two distinct electrode materials, presenting an effective solution to the energy storage limitations faced by ASCs. The current review concentrates on the progression of working materials to develop authentic pseudocapacitive energy storage systems (ESS). Also, evaluates their ability to exceed energy storage constraints. It provides insights into fundamental energy storage mechanisms, performance evaluation methodologies, and recent advancements in electrode material strategies. The review approaches developing high‐performance electrode materials and achieving efficient ASC types. It delves into critical aspects for enhancing the energy density of ASCs, presenting debates and prospects, thereby offering a comprehensive understanding and design principles for next‐generation ASCs in diverse applications.

With an excellent power conversion efficiency of 25.7%, closer to the Shockley–Queisser limit, perovskite solar cells (PSCs) have become a strong candidate for a next-generation energy harvester. However, the lack of stability and reliability in PSCs remained challenging for commercialization. Strategies, such as interfacial and structural engineering, have a more critical influence on enhanced performance. MXenes, two-dimensional materials, have emerged as promising materials in solar cell applications due to their metallic electrical conductivity, high carrier mobility, excellent optical transparency, wide tunable work function, and superior mechanical properties. Owing to different choices of transition elements and surface-terminating functional groups, MXenes possess the feature of tuning the work function, which is an essential metric for band energy alignment between the absorber layer and the charge transport layers for charge carrier extraction and collection in PSCs. Furthermore, adopting MXenes to their respective components helps reduce the interfacial recombination resistance and provides smooth charge transfer paths, leading to enhanced conductivity and operational stability of PSCs. This review paper aims to provide an overview of the applications of MXenes as components, classified according to their roles as additives (into the perovskite absorber layer, charge transport layers, and electrodes) and themselves alone or as interfacial layers, and their significant importance in PSCs in terms of device performance and stability. Lastly, we discuss the present research status and future directions toward its use in PSCs.