Natural polymers have been investigated as part of the endeavors of green chemistry practice in the oil field. However, natural polymer studies are still preliminary. The current study examines okra’s (natural polymer) efficiency for polymer flooding, particularly in Kazakhstan. The evaluation targets the heavy oil trapped in carbonate reservoirs. SEM and FTIR were used to characterize morphology and chemical composition. A rheology study was conducted under different shear rates for three plausible concentrations: 1 wt.%, 2 wt.% and 5 wt.%. The core flooding was challenged by the low porosity and permeability of the core. The results showed that okra’s size is between 150–900 μm. The morphology can be described by rod-like structures with pores and staking as sheet structures. The FTIR confirmed that the solution contains a substantial amount of polysaccharides. During the rheology test, okra showed a proportional relationship between the concentration and viscosity increase, and an inversely proportional relationship with the shear rate. At reservoir temperature, the viscosity reduction was insignificant, which indicated good polymer stability. Okra showed shear-thinning behavior. It was fitted to the Ostwald–de Waele power-law model by a (90–99)% regression coefficient. The findings confirm okra’s pseudo-plasticity, and that it is proportional to the solution concentration. The incremental oil recovery was 7%. The flow was found to be restricted due to the mechanical entrapment resulting from the large molecule size and the low porosity–permeability of the system. This study proves that the dominating feature of natural polysaccharide derivatives is their applicability to moderate reservoir conditions. The current study is a positive attempt at natural polymer application in Kazakhstan and similar field conditions.

Bacterial biofilms are one of the most important challenges that modern medicine faces due to the difficulties of diagnosis, antibiotic resistance, and protective mechanisms against aggressive environments. For these reasons, methods that ensure the inexpensive and rapid or real-time detection of biofilm formation on medical devices are needed. This study examines the possibilities of using optical- and fiber-based biosensors to detect and analyze early bacterial biofilms. In this study, the biofilm-forming model organism Pseudomonas aeruginosa was inoculated on the surface of the optical sensor and allowed to attach for 2 h. The biosensors were made by a fiber-tip ball resonator, fabricated through a CO₂ laser splicer on a single-mode fiber, forming a weak reflective spectrum. An optical backscatter reflectometer was used to measure the refractive index detected by the sensors during different growth periods. The early biofilm concentration was determined by crystal violet (CV) binding assay; however, such a concentration was lower than the detection limit of this assay. This work presents a new approach of biofilm sensing in the early attachment stage with a low limit of detection up to 10⁻⁴ RIU (refractive index units) or 35 ± 20 × 10³ CFU/mL (colony formed units).

Drug-eluting stents (DES) are mostly used in percutaneous coronary intervention, which is the main treatment for coronary artery occlusion. This procedure aims to restore the natural lumen, while minimizing the risk of restenosis. However, stent insertion increases the risk for infections, due to contamination of the device or insertion hub with normal skin flora. While coronary stent infection is a rare complication, it can be fatal. Currently, there is little information on biofilm formation on everolimus-eluting stents. Although everolimus is not designed as an antimicrobial agent, its antimicrobial activity should be investigated. In this study, biofilm formation on everolimus-eluting and bare metal stents (BMS) is characterized through biochemical and electrochemical methods. DES and BMS are inoculated with Pseudomonas aeruginosa and Staphylococcus epidermidis, both independently and in co-culture. Biofilms formed on DES were 49.6 %, 12.9 % and 47.5 % higher than on BMS for P. aeruginosa, S. epidermidis and their co-culture, respectively. Further, the charge output for DES was 18.9 % and 59.7 % higher than BMS for P. aeruginosa and its co-culture with S. epidermidis, respectively. This observation is most likely due to higher surface roughness of DES, which favors biofilm formation. This work shows that bioelectrochemical methods can be used for rapid detection of biofilms on drug-eluting and bare metal stents, which may find application in quality assessment of stents and in characterization of stents removed after polymicrobial infections.