So far, no coherent and comprehensive method has been elaborated allowing investigation of tensile strength of upholstery seams dedicated to upholstered furniture. Producers of this type of furniture are interested in the assessment of the quality of upholstery material joints, which seems to be particularly important for ensuring the appropriate quality of products. Therefore, the objective of this research was to investigate the influence of the type of material used and the direction of the fabric cut on the strength of upholstery covers. Static tensile testing of selected upholstery fabric samples was performed, and an attempt was made to identify the most optimal fabric–seam joints. It was stated as a conclusion that the fabric tensile strength was the highest for Secret 10 fabric. In addition, the strength of upholstery covers is not influenced by the direction of the fabric die cut. For each fabric, a different configuration is preferable, as shown by results (Power 13: A-B, Secret 10: B-B, Soft 10: A-A). The method, implemented for upholstered furniture, allows for an objective assessment of the strength of upholstery covers and the selection of the most advantageous fabric–seam combination for future furniture designs.
6 March 2026 in Drewno. Prace Naukowe, Doniesienia, Komunikaty = Wood. Research Papers, Reports, Announcements
Furniture is an object that accompanies us in everyday life. Therefore, it is important to choose appropriate dimensions, tailored to the human body, which will ensure comfort during use. Due to the noticeable gradual wear and tear of furniture or its components, these products are renewed and renovated. Both external and internal damages are reflected not only in the subjective feelings of furniture users, but also in objective studies showing comfort coefficients in numerical values. The main objective of this study was to compare the comfort of use of two AGA chairs before and after renovation. The objective was achieved by examining the comfort of use for the seat and backrest of both chairs using a sensor mat. The comparison was made based on the results of the tests, which were obtained in the form of color maps of stress distributions, SPD and D coefficients. For the first chair, the original layout was used, the same as in the chair before renovation, with the use of new materials. In the second chair, the upholstery layout was changed in relation to the original. Based on the results obtained, it was noted that during the renovation of used chairs, restoring their original structure results in improved utility properties. However, any changes to the structure that differ from the original upholstery layout may result in the failure to restore the initial level of comfort.