Phosphorene-like InP3 is reported with first-principles calculations, which is a direct-bandgap semiconductor with anisotropic carrier mobility and high catalytic activity toward the hydrogen evolution reaction.
The recyclable utilization of waste biomass is increasingly important for the development of a sustainable society. Here, the sawdust-derived activated carbon (SD-AC) has been prepared via a convenient H3PO4-based activation method and further trialed as an electrode for use as a high-performance symmetric supercapacitor. The as-prepared SD-AC possesses a hierarchically porous structure with micropores (0.55 nm) and mesopores (2.58 nm), accounting for its high specific surface area of 621 m2 g−1, with a pore volume of 0.35 cm3 g−1. Such a hierarchically porous structure can offer a favorable pathway for fast ion penetration and transportation, enhancing its electrochemical performance. As a result, the SD-AC electrode exhibits a maximum specific capacitance of up to 244.1 F g−1 at 1.0 A g−1, a high rate capability (129.06 F g−1 at 20 A g−1), and an excellent cycling performance, with 87% retention over 10,000 cycles at 10 A g−1. Of particular note is that the SD-AC-based symmetric supercapacitor achieves a maximum energy density of 19.9 Wh kg−1 at the power density of 650 W kg−1, with a long-term cycle lifespan. This work showcases the recyclable utilization of waste biomass for the preparation of high-value activated carbon for efficient energy storage.
It is of great significance to recycle the silicon (Si) kerf slurry waste from the photovoltaic (PV) industry. Si holds great promise as the anode material for Li-ion batteries (LIBs) due to its high theoretical capacity. However, the large volume expansion of Si during the electrochemical processes always leads to electrode collapse and a rapid decline in electrochemical performance. Herein, an effective carbon coating strategy is utilized to construct a precise Si@CPPy composite using cutting-waste silicon and polypyrrole (PPy). By optimizing the mass ratio of Si and carbon, the Si@CPPy composite can exhibit a high specific capacity and superior rate capability (1436 mAh g−1 at 0.1 A g−1 and 607 mAh g−1 at 1.0 A g−1). Moreover, the Si@CPPy composite also shows better cycling stability than the pristine prescreen silicon (PS-Si), as the carbon coating can effectively alleviate the volume expansion of Si during the lithiation/delithiation process. This work showcases a high-value utilization of PV silicon scraps, which helps to reduce resource waste and develop green energy storage.
We have studied unsupported, silica gel- and amorphous silica–alumina-supported catalysts derived from K salts for the vapor-phase dehydration of lactic acid (LA) to acrylic acid (AA). A catalytic study shows that the supported catalysts improve the activity and selectivity for the production of AA and decrease the selectivity for the production of propionic acid (PA). The silica–alumina-supported catalysts remain fairly stable in the catalytic performance during 90 h of reaction. The IR spectroscopic characterization combined with the catalytic study demonstrates that potassium lactate (C3H5KO3) in situ generated from LA and a K salt is an important reaction intermediate for the production of AA and the catalytic stability is associated with the chemical stability of C3H5KO3 and the activity for the regeneration of C3H5KO3 in the catalytic cycle. On silica–alumina, C3H5KO3 is well stabilized and smoothly regenerated during the reaction, leading to the good catalytic stability. This work suggests for the first time that lactate salt acts as the true catalytic active species for the dehydration of LA to AA. We also propose a predominant reaction pathway for the vapor-phase dehydration of LA to AA with K salt catalyst systems.