Fourier ptychography imaging is a powerful phase retrieval method that can be used to realize super-resolution. In this study, we establish a mathematical model of long-distance camera scanning based on reflective Fourier ptychography imaging. In order to guarantee the effective recovery of a high-resolution image in the experiment, we analyze the influence of laser coherence in different modes and the surface properties of diverse materials for diffused targets. For the analysis, we choose a single-mode fiber laser as the illumination source and metal materials with high diffused reflectivity as the experimental targets to ensure the validity of the experimental results. Based on the above, we emulate camera scanning with a single camera attached to an X-Y translation stage, and an experimental system with a working distance of 3310 mm is used as an example to image a fifty-cent coin. We also perform speckle analysis for rough targets and calculate the average speckle size using a normalized autocorrelation function in different positions. The method of calculating the average speckle size for everyday objects provides the premise for subsequent research on image quality evaluation; meanwhile, the coherence of the light field and the targets with high reflectivity under this experiment provide an application direction for the further development of the technique, such as computer vision, surveillance and remote sensing.

Fourier ptychography (FP) is a powerful phase retrieval method that can be used to reconstruct missing high-frequency details and high-space-bandwidth products in microscopy. In this study, we further advanced the application of FP in microscopic imaging to the field of macroscopic far-field imaging, incorporating camera scanning for spatial resolution improvement. First, on the basis of the Fraunhofer diffraction mechanism and the transmission imaging model, we found the analysis of the associated theoretical fundamentals via simulations and experiments to be crucially relevant to the far-field of FP imaging. Second, we built an experimental device with long-distance imaging and experimentally demonstrated the relationship between the spectrum overlap ratio and the reconstructed high-resolution image. The simulation and experimental results showed that an overlap ratio higher than 50% had a good reconstruction effect. Third, camera scanning was used to obtain low-resolution intensity images in this study, for which the scanning range was wide and spherical wave illumination was satisfied, and therefore different positions corresponded to different aberrations of low-resolution intensity images, and even different positions of the same image had aberration differences, leading to inconsistencies in the aberrations of different images. Therefore, in the reconstruction process, we further overcame the effect of the inconsistency of aberrations of different images using the partition reconstruction method, which involves cutting the image into smaller parts for reconstruction. Finally, with the proposed partition reconstruction algorithm, we were able to resolve 40 μm line width of GBA1 resolution object and obtain a spatial resolution gain of 4× with a working distance of 2 m.