Oxide metallurgy technology plays an important role in inclusion control and is also applied to improve the weldability of high strength steel. Based on the requirements of the weldability in high strength steel, the influencing factors of weld heat affected zone (HAZ) as well as the development and application status of oxide metallurgy technology are summarized in this review. Moreover, the advantages and difficulties in the application of rare earth (RE) oxide metallurgy technology are analyzed, combined with the performance mechanism of RE and its formation characteristics of fine and high melting point RE inclusions with distribution dispersed in liquid steel. With the weldability diversities of different high strength steels, the research status of weldability of high strength steel with high carbon equivalent and the effects of RE on the microstructure and properties of HAZ are discussed, and some suggestions about further research in the future are proposed.

Two submerged entry nozzles (SENs) used for casting 1300 tons and 260 tons of Al-killed steel were dissected. Several parameters including block rate, nozzle clog angle, port width, and port height of the clogged nozzle were introduced to describe the geometry of clogs in the SENs based on the dissection; furthermore, a geometry model was established to describe the characteristics of the nozzle clogging of the SENs. A large-eddy simulation (LES) coupled with the volume of fraction (VOF) method was adopted to simulate the steel–slag interface’s interaction behavior. The vortex visualization and rotation magnitude were characterized by the Liutex method. Quantitatively, the influence of nozzle clogging resulted in block rates of 0% to 45.9% on the flow and vortex distribution in the mold, and the characteristics of the steel–slag interface fluctuation were well verified in the industrial experiment.