This research aims to assess the efficiency of the synthesized corncob as a cost-effective and eco-friendly adsorbent for the removal of heavy metals. Therefore, to carry out the intended research project, initially, the corncob was doped with nanoparticles to increase its efficiency or adsorption capacity. The prepared adsorbent was evaluated for the adsorption of cadmium (Cd) and chromium (Cr) from aqueous media with the batch experiment method. Factors that affect the adsorption process are pH, initial concentration, contact time and adsorbent dose. The analysis of Cd and Cr was performed by using atomic absorption spectrometry (AAS), while the characterization of the adsorbent was performed using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results showed that there is a significant difference before and after corncob activation and doping with CeO2 nanoparticles. The maximum removal for both Cd and Cr was at a basic pH with a contact time of 60 min at 120 rpm, which is 95% for Cd and 88% for Cr, respectively. To analyze the experimental data, a pseudo-first-order kinetic model, pseudo-second-order kinetic model, and intra-particle diffusion model were used. The kinetic adsorption studies confirmed that the experimental data were best fitted with the pseudo-second-order kinetic model (R2 = 0.989) and intra-particle diffusion model (R2 = 0.979). This work demonstrates that the cerium oxide/corncob nanocomposite is an inexpensive and environmentally friendly adsorbent for the removal of Cd and Cr from wastewater.
Nanocellulose based titanium dioxide nanocomposite (NC/TiO2) with enhanced adsorption and photocatalytic properties is a favorable material for treating wastewater of textile industry. The NCTiO2 nanocomposite was fabricated by a two-step hydrothermal process and characterized through X-ray diffraction (XRD), Fourier-transform infrared-spectroscopy (FT-IR), Field emission scanning electron microscopy (FE-SEM), and Ultraviolet-visible absorption spectroscopy (UV-Vis Absorption Spectroscopy) techniques. The maximum percentage removal efficiencies under optimum experimental conditions for total dissolved solids total salts, turbidity, chemical oxygen demand (COD), and color in textile industry A and textile industry B were observed to be 49.16% and 65.05%, 74.98% and 80.64%, 97.48% and 100%, 87.18% and 92.03%, and 75.58% and 93.86%, respectively. The maximum photocatalytic degradation efficiencies for the removal of turbidity, COD and color in textile industry A and textile industry B were observed to be 96.21% and 99.66%, 85.82% and 87.43%, and 76.60% and 95.82%, respectively. Due to low initial concentration values of treatment parameters, the adsorption and photocatalytic removal efficiencies of textile industry B were higher as compared to textile industry A. The current study suggests that NC/TiO2 has the potential to be used as a highly efficient adsorbent and photocatalyst for removing pollutants from wastewater.
18 January 2024 in Environmental Monitoring and Assessment