Laser drilling is a preferable method in drilling micro and slender holes because of its non-physical contact between the tool and the workpiece leading to elimination of the problems like chatter and vibration. In this article, an experimental investigation of the laser drilling process is carried out on thin sheet (0.5 mm) of titanium alloy (Ti6Al4V) using pulsed Nd:YAG laser. The study investigates the effect of laser parameters such as laser energy, pulse repetition rate, pulse width and gas pressure on hole quality characteristics, namely, circularity at entry and exit, taper and spatter area. Taguchi’s L27 orthogonal array is adopted for conducting the experiments to establish significance of control parameters on the performance measures with less number of experimental run. Analysis of variance shows that laser energy and pulse width significantly influence on circularity, taper and spatter area. Optimal parameter setting for all the performance measures is suggested. Statistically valid empirical models relating hole quality characteristics with laser parameters have been developed based on least square regression analysis. Backpropagation artificial neural network is used predict the output responses considering laser process parameters as inputs. A mean square error within 5% for both the training and testing data suggests the adequacy and robustness of the proposed artificial neural network model. Variation of performance measures with respect to process parameters is predicted through the well-trained artificial neural network model. The pattern of variation exhibits good agreement with the main effect plots obtained through Taguchi method. Artificial neural network model produces mean relative error of 0.001, 0.001, 0.0437 and 0.0234 for circularity at entry, circularity at exit, taper and spatter area, respectively, when compared with experimental values. Since small values of mean relative error are obtained, the proposed artificial neural network model can be satisfactorily used for prediction of quality characteristics of laser micro-drilled holes.
Surface biofouling, corrosion, and wettability are important parameters to understand and characterize aluminum alloys to prevent the failure in marine environments. Antifouling technologies predominantly encompass chemical and biocidal approaches with negative environmental consequences. Therefore, this study focuses on a new method of producing non‐toxic and effective antifouling and corrosion‐resistant surfaces. In this study, ultrafast laser texturing is used to modify the surface of an aluminum alloy using a femtosecond laser system. Five different unique texture patterns are designed and fabricated using 3 W laser power, 100 kHz pulse repetition rate, and 4 mm s−1 scanning speed in order to make the aluminum surface antifouling and corrosion resistant. The non‐textured sample has a contact angle of 85° while the textured samples have contact angles of up to 157°. The contact angle increased with time up to 90 days of aging. Biofouling assessment is conducted using marine algae Nitzschia ovalis as a marine fouling test organism. A reduction of biofilm coverage of 79% is recorded from the laser‐produced star pattern texture. This study demonstrates that laser‐textured surfaces have the potential to mitigate the formation of biofilms on the surfaces while also providing a mechanism to control the relative level of corrosion.
13 January 2022 in Journal of the Brazilian Society of Mechanical Sciences and Engineering