This study examined the effect of the width–thickness ratio ( w∕t ratio) on the seismic behavior of cold-formed hollow structural section (HSS) bracing members. For this purpose, an experimental study was carried out. Quasi-static reversed cyclic loading was applied to the specimens. The loading pattern for the tests was determined based on a nonlinear dynamic time history analysis of a frame under earthquake ground motions (EQGM). For this purpose, a three-story specially concentric braced frame (SCBF) was designed according to the AISC LRFD manual. The analysis results showed that a displacement history during the EQGM experienced by bracing members is symmetric in compression and tension. This symmetry may be due to the strong beams in the SCBF connecting bracing members. According to the AISC LRFD manual these beams should resist the unbalanced force associated with compression and tension forces from the connected bracing members. This study adopted a symmetric loading history in compression and tens...
This study proposes a method for selecting ground motions from a ground motion library with response spectra that match the target response spectrum mean, variance, and correlation structures. The proposed method is conceptually simple and straightforward. In this method, a desired number of ground motions are sequentially selected from first to last. The accuracy and consistency of the proposed method are verified through comparisons of the ground motions selected using the proposed method with those selected using conventional methods. This study shows that the seismic responses of the frames vary according to ground motion selection and correlation structures.