The preparation and characteristics of rigid polyurethane foams (RPUFs) synthesized from polyols obtained by glycolysis of post-industrial waste RPUFs have been studied. More precisely, waste rigid foams that have been chemically recycled by glycolysis in this work are industrially produced pieces for housing and bracket applications. The glycolysis products have been purified by vacuum distillation. The physicochemical properties of the polyols, such as hydroxyl value, acid value, average molecular weight (M_n) and viscosity have been analyzed. The chemical structure and thermal stability of the polyols have been studied by means of FTIR and TGA, respectively. Partial substitution of the commercial polyol (up to 15 wt.%) by the recycled polyols increases the reactivity of the RPUFs synthesis, according to short characteristic times during the foaming process along with more exothermic temperature profiles. Foams formulated with recycled polyols have a lower bulk density (88.3–96.9 kg m⁻³) and smaller cell sizes compared to a conventional reference RPUF. The addition of recycled polyols (up to 10 wt.%) into the formulation causes a slight decrease in compressive properties, whereas tensile strength and modulus values increase remarkably.

This work addresses a novel bio-solvolysis process for the treatment of complex poly(ethylene terephthalate) (PET) waste using a biobased monoethylene glycol (BioMEG) as a depolymerization agent in order to achieve a more sustainable chemical recycling process. Five difficult-to-recycle PET waste streams, including multilayer trays, coloured bottles and postconsumer textiles, were selected for the study. After characterization and conditioning of the samples, an evaluation of the proposed bio-solvolysis process was carried out by monitoring the reaction over time to determine the degree of PET conversion (91.3–97.1%) and bis(2-hydroxyethyl) terephthalate (BHET) monomer yield (71.5–76.3%). A monomer purification process, using activated carbon (AC), was also developed to remove the colour and to reduce the metal content of the solid. By applying this purification strategy, the whiteness (L*) of the BHET greatly increased from around 60 to over 95 (L* = 100 for pure white) and the Zn content was significantly reduced from around 200 to 2 mg/kg. The chemical structure of the purified monomers was analyzed via infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC), and the composition of the samples was measured by proton nuclear magnetic resonance (¹H-NMR), proving a high purity of the monomers with a BHET content up to 99.5% in mol.

Polyurethane (PU) is one of the most versatile polymers available and can be found in an infinite number of formats ranging from rigid or flexible foams to elastomers. Currently, most Rigid PU Foam (RPUF) waste is landfilled, even though a small amount is mechanically recycled, in which the material is conditioned in size to a very fine powder, which is introduced as a filler. In this work, chemical recycling of two types of rigid PU foams is studied, the major difference being the aliphatic or aromatic nature of the isocyanate used in the synthesis. A solvolysis process is developed, a chemical depolymerization that breaks the chains by means of a chemical agent, a solvent, in the presence of a catalyst and under controlled process conditions. The glycolysis products are purified by vacuum distillation, centrifugation, and acid water treatment, depending on the most suitable process for each waste type. Optimal process conditions are established to obtain high-purity green polyols by performing a set of catalytic glycolysis reactions at laboratory scale with the previously conditioned RPUF waste samples. The physicochemical properties of the polyols, such as hydroxyl value, acid value, average molecular weight (M_n), and viscosity, are analyzed. The chemical structure and thermal stability of the polyols are studied by means of FTIR and TGA, respectively. Partial substitution of the commercial polyol (up to 15 wt.%) by the recycled polyols for RPUF synthesis is studied and characterized.

Addressing the environmental impact of poly(ethylene terephthalate) (PET) disposal highlights the need for efficient recycling methods. Chemical recycling, specifically alkaline hydrolysis, presents a promising avenue for PET waste management by depolymerizing PET into its constituent monomers. This study focuses on optimizing the pressurized alkaline hydrolysis process for post-consumer PET residues obtained from packaging materials. Post-consumer PET packaging waste was chemically recycled by means of an alkaline hydrolysis reaction in a 2 L pressurized reactor under varying conditions of the NaOH/PET ratio and temperature. The reaction’s progress was monitored by sampling the liquid phase hourly over a four-hour period. The obtained products were purified, with a focus on isolating terephthalic acid (TPA). Higher temperatures (150 °C) resulted in superior TPA yields (>95%) compared to lower temperatures (120 °C). The NaOH/PET ratio showed minimal influence on the TPA yield. The optimal conditions (T = 150 °C; NaOH:PET = 2) were identified based on TPA yield and reaction cost considerations. This study demonstrates the feasibility of pressurized alkaline hydrolysis for PET recycling, with optimized conditions yielding high TPA purity and efficiency.

The chemical recycling of poly(ethylene terephthalate) –PET– fractions, derived from actual household packaging waste streams, using solvolysis, was investigated. This recycling strategy was applied after a previous on-line automatic identification, by near-infrared spectroscopy –NIR–, and a subsequent selective sorting of the different PET materials that were present in the packaging wastes. Using this technology, it was possible to classify fractions exclusively including PET, virtually avoiding the presence of both other plastics and materials, such as paper, cardboard and wood, that are present in the packaging wastes, as they were efficiently recognised and differentiated. The simple PET fractions, including clear and monolayered materials, were adequate to be recycled by mechanical means meanwhile the complex PET fractions, containing highly coloured and multi-layered materials, were suitable candidates to be recycled by chemical routes. The depolymerisation capacity of the catalytic glycolysis, when applied to those complex PET wastes, was studied by evaluating the effect of the process parameters on the resulting formation and recovery of the monomer bis(2-hydroxyethyl) terephthalate –BHET– and the achieved quality of this reaction product. Comparable and reasonable results, in terms of monomer yield and its characteristics, were obtained independently of the type of complex PET waste that was chemically recycled.