Aleksey Aleksandrovich Ignatyev

Dr. Aleksey Aleksandrovich Ignatyev

Yaroslavl State Technic University: Yaroslavl, Yaroslavl, RU
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 December 2018 in MATEC Web of Conferences
Verified
Journal Article
Open access
AIAleksey Aleksandrovich Ignatyev
Aleksey Aleksandrovich Ignatyev
DGDenis Gerasimov
Denis Gerasimov
IGIgor Golikov
Igor Golikov
VGValeriy Gotovtsev
Valeriy Gotovtsev
The paper presents the results of experimental studies to identify the possibility of using large-tonnage industrial mineral waste in the production of asphalt concrete mixtures. As a raw material for the production of asphalt used phosphogypsum - waste production of phosphoric acid, resulting from the processing of apatite. The reserves of this product are measured in millions of tons and are constantly replenished, stored in open dumps, representing a serious threat to the environmental situation in the surrounding areas. Phosphogypsum is a mineral powder material, the dispersion characteristics of which correspond to the mineral powder in the production of asphalt concrete. The method of production of granulated as-falto-concrete mixture developed by the authors of the article by the method of rolling involves the use of a significantly higher content of expensive mineral powder in comparison with typical mixtures. Therefore, the use of cheap phosphogypsum for these purposes is very attractive. However, the first attempts to obtain a granulated product based on phosphogypsum were unsuccessful - the asphalt-concrete mixture did not withstand the effects of moisture. Further studies allowed us to solve the problem of material resistance by modifying bitumen with polyethylene terephthalate, one of the most common household plastic waste. The subject of the article is devoted to the development of prescription and regime parameters of the process of obtaining new material. Test methods for asphalt concrete are strictly standardized in connection with which standard techniques were used. As a result of the research, an asphalt-concrete mixture was obtained, surpassing typical materials in many performance characteristics and allowing to solve a global environmental problem.

1 January 2023 in Известия Казанского государственного архитектурно-строительного университета
Verified
Journal Article
Closed access
AIAleksey Aleksandrovich Ignatyev
Aleksey Aleksandrovich Ignatyev

21 August 2025 in Construction Materials and Products
Verified
Journal Article
Closed access
VPVictoria Petropavlovskaya
Victoria Petropavlovskaya
KPKirill Petropavlovskii
Kirill Petropavlovskii
TNTatiana Novichenkova
Tatiana Novichenkova
Sergey V. KlyuevSergey V. Klyuev
Sergey V. Klyuev
YVY.E. Vasilev
Y.E. Vasilev
AIAleksey Aleksandrovich Ignatyev
Aleksey Aleksandrovich Ignatyev
At present, improving the performance properties of concrete for dry and hot climates due to changing climatic conditions is of increasing interest to a wide range of researchers from the point of view of their practical application in the production of construction products. The paper investigates the possibility of synthesizing a spatially reinforced fine-crystalline structure of cement concrete for dry and hot climates, modified with basalt dust. The introduction of basalt dust waste into the composition of cement concrete forms the structure of artificial stone with the most dense packing. This is achieved by using a complex modifier based on basalt production dust removal waste together with a plasticizing additive in the composition of concrete for dry and hot climates. The introduction of these additives allows creating the best conditions for the process of forming the structure of cement stone from the standpoint of water content. Providing water content at all stages of the synthesis of modified stone allows for the acceleration and more complete flow of hydration and structure formation processes. The combined use of additives, as studies have shown, improves the performance properties of cement concrete, and therefore its use in the production of an expanded range of building products.

19 January 2022 in Resources
Verified
Journal Article
Open access
PDF file
AIAleksey Aleksandrovich Ignatyev
Aleksey Aleksandrovich Ignatyev
PRPavel B. Razgovorov
Pavel B. Razgovorov
RNRoman S. Nagornov
Roman S. Nagornov
Natalia PolitaevaNatalia Politaeva
Natalia Politaeva
LMLiliya R. Mukhametova
Liliya R. Mukhametova
SISvetlana B. Ilyashenko
Svetlana B. Ilyashenko
This paper considers mineral compositions and prospects for the processing of natural blue montmorillonite clay, pink Fe (III)-containing clay, and green Fe (II)-containing clay into composite aluminosilicate materials suitable for the sorption of related substances of vegetable oils. New Brønsted and Lewis centers were found on the surface of the materials obtained when solutions of oxalic and succinic acids and sodium carbonate in scientifically-substantiated amounts were used as modifying additives. The established changes in the surface states are in correlation with the assessed affinity degree of active sites towards fatty acids, peroxide compounds, carotenoids, and chlorophylls in vegetable oils (flaxseed, olive, mustard), which are rarely refined in world production. These findings are of practical value for the development of a new direction of medical chemistry. It was revealed that the presence of impure hydromuscovite in natural raw materials and the resulting materials reduces the effect of extracting dyes from vegetable oils.

12 June 2018 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
AIAleksey Aleksandrovich Ignatyev
Aleksey Aleksandrovich Ignatyev
DGD Gerasimov
D Gerasimov
IGI Golikov
I Golikov
VGV Gotovtsev
V Gotovtsev
The article describes the new method for producing the asphalt concrete mixture, which has high strength characteristics, minimal water saturation. An attempt was made to theoretically substantiate the mechanism of hardening of the material. Asphalt concrete is a typical dispersed-filled composite material in which mineral particles of different dispersity are used as a filler, and the matrix is a binder-bitumen. To obtain a high-quality composite, it is necessary to ensure continuity of the material matrix. However, the formulations of asphalt-concrete mixtures used do not satisfy this requirement. This is due, on the one hand, to economic considerations, on the other hand, to a decrease in the strength of the material. The proposed method allows to solve this problem. The main consumer of bitumen in the asphalt mix is the smallest filler particles – mineral powder, which consumes up to 95 % of the binder. It is proposed to introduce a binder into the mineral powder by the granulation method by pelletizing. When the material moves in a rotating granulator, two types of forces act on the material particles: tearing off, caused by dynamic factors, and restraining forces caused by intermolecular interaction. Their combined effect makes it possible to form an ordered structure of the material with the finest interlayer layers of the binder between the solid particles realizing the nanoeffect. The structure thus obtained forms a continuous matrix of composite material with a minimum content of bitumen and strength indicators, several times higher than the requirements of GOST. The presence of a continuous matrix minimizes the water saturation of asphalt concrete, ensuring high durability of the road surface. The properties of the binder in the interlayers between the particles of the mineral powder differ significantly from the properties of the bulk bitumen, which prevents it from extruding at an elevated temperature from the structure of the material under the action of external transport loads, resulting in a consequent brittle failure. From the standpoint of the mechanics of a continuous medium, the stress state in liquid interlayers is represented by a set of spherical and deviator tensors, which made it possible to describe the mechanism of hardening of the material. The results of experimental studies are presented, which confirm the possibility of obtaining a qualitatively new asphalt-concrete mixture with characteristics that are substantially higher than the requirements of GOST, which is a worthy alternative to the traditional method of obtaining the material.

1 October 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
VGV M Gotovtsev
V M Gotovtsev
AIAleksey Aleksandrovich Ignatyev
Aleksey Aleksandrovich Ignatyev
A mechanism for structuring the dispersion-filled composite materials by the example asphalt concrete is considered in this paper. The effect of an abrupt increase in the strength and water resistance of the material is conditioned the manifestation of intermolecular interaction forces, is shown, which occurs during the formation of binder films between dispersed aggregate particles with a thickness comparable to the radius of action of intermolecular attraction forces. It was established that the structuring of asphalt concrete is manifested when the thickness of the liquid interlayers between the particles of the mineral powder is about 10-7 m, which allows to attribute the effect to the category of nano effects. The technology of industrial production of structured material based on pelletizing is proposed. The test results of the new material are presented. The possibility of using the developed technology for the disposal of industrial waste is shown.