The accuracy of training samples used for data classification methods, such as support vector machines (SVMs), has had a considerable positive impact on the results of urban area extractions. To improve the accuracy of urban built-up area extractions, this paper presents a sample-optimized approach for classifying urban area data using a combination of the Defense Meteorological Satellite Program-Operational Linescan System (DMSP-OLS) for nighttime light data, Landsat images, and GlobeLand30, which is a 30-m global land cover data product. The proposed approach consists of three main components: (1) initial sample generation and data classification into built-up and non-urban built-up areas based on the maximum and minimum intervals of digital numbers from the DMSP-OLS data, respectively; (2) refined sample selection and optimization by the probability threshold of each pixel based on vegetation-cover, using the Landsat-derived normalized differential vegetation index (NDVI) and artificial surfaces extracted from the GlobeLand30 product as the constraints; (3) iterative classification and urban built-up area data extraction using the relationship between these three aspects of data collection together with the training sets. Experiments were conducted for several cities in western China using this proposed approach for the extraction of built-up areas, which were classified using urban construction statistical yearbooks and Landsat images and were compared with data obtained from traditional data collection methods, such as the threshold dichotomy method and the improved neighborhood focal statistics method. An analysis of the empirical results indicated that (1) the sample training process was improved using the proposed method, and the overall accuracy (OA) increased from 89% to 96% for both the optimized and non-optimized sample selection; (2) the proposed method had a relative error of less than 10%, as calculated by an accuracy assessment; (3) the overall and individual class accuracy were higher for artificial surfaces in GlobeLand30; and (4) the average OA obviously improved and the Kappa coefficient in the case of Chengdu increased from 0.54 to 0.80. Therefore, the experimental results demonstrated that our proposed approach is a reliable solution for extracting urban built-up areas with a high degree of accuracy.

This paper proposes to use band selection-based dimensionality reduction (BS-DR) technique in addressing a challenging multi-temporal hyperspectral images change detection (HSI-CD) problem. The aim of this work is to analyze and evaluate in detail the CD performance by selecting the most informative band subset from the original high-dimensional data space. In particular, for cases where ground reference data are available or unavailable, either supervised or unsupervised CD approaches are designed. The following sub-problems in HSI-CD are investigated, including: (1) the estimated number of multi-class changes; (2) the binary CD; (3) the multiple CD; (4) the estimated optimal number of selected bands; and (5) computational efficiency. The main contribution of this paper is to provide for the first time a thorough analysis of the impacts of band selection on the HSI-CD problem, thus to fix the gap in the state-of-the-art techniques either by simply utilizing the full dimensionality of the data or exploring a complex hierarchical change analysis. It is applicable to CD problems in multispectral or PolSAR images when the feature space is expanded for discriminant feature extraction. Two real multi-temporal hyperspectral Hyperion datasets are used to validate the proposed approaches. Quantitative and qualitative experimental results demonstrated that by selecting a subset of the most informative and distinct spectral bands, the proposed approaches offered better CD performance than the state-of-the-art techniques using original full bands, without losing the change representative and discriminable capabilities of a detector.

Recent advances in the fusion technology of remotely sensed data have led to an increased availability of extracted urban information from multiple spatial resolutions and multi-temporal acquisitions. Despite the existing extraction methods, there remains the challenging task of fully exploiting the characteristics of multisource remote sensing data, each of which has its own advantages. In this paper, a new fusion approach for accurately extracting urban built-up areas based on the use of multisource remotely sensed data, i.e., the DMSP-OLS nighttime light data, the MODIS land cover product (MCD12Q1) and Landsat 7 ETM+ images, was proposed. The proposed method mainly consists of two components: (1) the multi-level data fusion, including the initial sample selection, unified pixel resolution and feature weighted calculation at the feature level, as well as pixel attribution determination at decision level; and (2) the optimized sample selection with multi-factor constraints, which indicates that an iterative optimization with the normalized difference vegetation index (NDVI), the modified normalized difference water index (MNDWI), and the bare soil index (BSI), along with the sample training of the support vector machine (SVM) and the extraction of urban built-up areas, produces results with high credibility. Nine Chinese provincial capitals along the Silk Road Economic Belt, such as Chengdu, Chongqing, Kunming, Xining, and Nanning, were selected to test the proposed method with data from 2001 to 2010. Compared with the results obtained by the traditional threshold dichotomy and the improved neighborhood focal statistics (NFS) method, the following could be concluded. (1) The proposed approach achieved high accuracy and eliminated natural elements to a great extent while obtaining extraction results very consistent to those of the more precise improved NFS approach at a fine scale. The average overall accuracy (OA) and average Kappa values of the extracted urban built-up areas were 95% and 0.83, respectively. (2) The proposed method not only identified the characteristics of the urban built-up area from the nighttime light data and other daylight images at the feature level but also optimized the samples of the urban built-up area category at the decision level, making it possible to provide valuable information for urban planning, construction, and management with high accuracy.

Among various multimodal remote sensing data, the pairing of multispectral (MS) and panchromatic (PAN) images is widely used in remote sensing applications. This article proposes a novel global collaborative fusion network (GCFnet) for joint classification of MS and PAN images. In particular, a global patch-free classification scheme based on an encoder-decoder deep learning (DL) network is developed to exploit context dependencies in the image. The proposed GCFnet is designed based on a novel collaborative fusion architecture, which mainly contains three parts: 1) two shallow-to-deep feature fusion branches related to individual MS and PAN images; 2) a multiscale cross-modal feature fusion branch of the two images, where an adaptive loss weighted fusion strategy is designed to calculate the total loss of two individual and the cross-modal branches; 3) a probability weighted decision fusion strategy for the fusion of the classification results of three branches to further improve the classification performance. Experimental results obtained on three real datasets covering complex urban scenarios confirm the effectiveness of the proposed GCFnet in terms of higher accuracy and robustness compared to existing methods. By utilizing both sampled and non-sampled position data in the feature extraction process, the proposed GCFnet can achieve excellent performance even in a small sample-size case. The codes will be available from the website: https://github.com/SicongLiuRS/GCFnet.

The Turkey–Syria earthquake on 6 February 2023 resulted in losses such as casualties, road damage, and building collapses. We mapped and quantified the areas impacted by the earthquake at different distances and directions using NOAA-20 VIIRS nighttime light (NTL) data. We then explored the relationship between the average changes in the NTL intensity, population density, and building density using the bivariate local indicators of the spatial association (LISA) method. In Turkey, Hatay, Gaziantep, and Sanliurfa experienced the largest NTL losses. Ar Raqqah was the most affected city in Syria, with the highest NTL loss rate. A correlation analysis showed that the number of injured populations in the provinces in Turkey and the number of pixels with a decreased NTL intensity exhibited a linear correlation, with an R-squared value of 0.7395. Based on the changing value of the NTL, the areas with large NTL losses were located 50 km from the earthquake epicentre in the east-by-south and north-by-west directions and 130 km from the earthquake epicentre in the southwest direction. The large NTL increase areas were distributed 130 km from the earthquake epicentre in the north-by-west and north-by-east directions and 180 km from the earthquake epicentre in the northeast direction, indicating a high resilience and effective earthquake rescue. The areas with large NTL losses had large populations and building densities, particularly in the areas approximately 130 km from the earthquake epicentre in the south-by-west direction and within 40 km of the earthquake epicentre in the north-by-west direction, which can be seen from the low–high (L-H) pattern of the LISA results. Our findings provide insights for evaluating natural disasters and can help decision makers to plan post-disaster reconstruction and determine risk levels on a national or regional scale.

The rapid urbanization in China has corresponded with rapid economic development and beneficial transformations of society that have also exacerbated many sensitive urban problems. Several “ghost cities” have emerged due to the mismatch between the speed of expansion and the rationality of urban planning, especially when the extensive city construction goes far beyond the actual peoples’ demands. This paper presents a novel method for investigating “ghost city” phenomenon based on multisource remotely sensed data. Three components are included. First, coarse-to-fine built-up area extraction and multiscale integration based on nighttime light Defense Meteorological Satellite Program operational linescan system imagery, Chinese land cover/use datasets and maximum green vegetation fraction product. Second, improved “ghost city” index (IGCI) construction and discrimination of “ghost city” phenomenon comprising the rate of land urbanization, the rate of population urbanization, and the intensity of nighttime light. Third, comparison and validation of the IGCI with the traditional “ghost city” index with respect to spatio-temporal distribution and the landscape pattern of “ghost city.” The proposed method was validated using entire districts in Ordos, China. Experimental results demonstrated that the IGCI takes advantages of the spatio-temporal variations of cities and the characteristics of “ghost city” phenomenon. This is also validated by means of the per capita housing construction area and the landscape expansion index, and showed that the urban construction land grows much faster than the population of Ordos. With respect to the accuracy and distribution of spatial patterns, the obtained experimental results exhibit good consistency with results from previous statistical studies.