Herein, a new gas-cycle-assisted (GCA) headspace solid-phase microextraction (HS-SPME) device was designed to rapidly extract organic pollutants with high Kow and boiling points, which have difficulty in volatilization from matrix to headspace. Organic pollutants, including three polycyclic aromatic hydrocarbons (PAHs), four polychlorinated biphenyls (PCBs), and five phthalate esters (PAEs), were selected to evaluate the performance of GCA HS-SPME. Compared with conventional HS-SPME, the equilibrium times of GCA HS-SPME for extraction of PAHs, PCBs, and PAEs were greatly shortened from 70–90 to 5–11 min. Moreover, the limits of detection for analysis of PAHs were achieved at pg mL−1 level by GCA HS-SPME coupled with gas chromatography-flame ionization detection.
Self-supporting electrode offers the advantage of high conductivity, rich adsorption sites and fast ion transfer rate, and thereby benefiting to enhance the CDI performance. In this work, a self-supporting CuxS/CNTs electrode was designed by the solvothermal and microwave hydrothermal method successively using Cu-MOF-199/CNTs as self-sacrificial precursors. The derived CuxS/CNTs electrode was a hollow nanorod-like structure with rough surface, which favored the ion diffusion. Moreover, the electrochemical measurements confirmed that the self-supporting CuxS/CNTs electrode possessed a dual pseudocapacitive behavior and smaller interfacial charge transfer resistance. As expected, through synergistic coordination effects of CNTs and CuxS, a maximum adsorption capacity of 1580.50 mg g-1 was obtained, increasing by 39.64% compared with that of pristine CuxS electrode. Additionally, the model fitting analysis showed that TC removal over self-supporting CuxS/CNTs electrode was consistent with pseudo-second-order kinetic model and Langmuir adsorption isotherm. After 4 cycles, TC adsorption capacity declined by 21.02%. XPS verifies the reversible adsorption/desorption by CuxS/CNTs electrode. Meanwhile, the hollow structure of CuxS/CNTs electrode was remained after 4 cycles, highlighting the structure stability. In conclusion, the prepared self-supporting CuxS/CNTs electrode with adsorption capacity provided a new idea for the electrode preparation and further used for antibiotic treatment by capacitive deionization.