The importance measure is a crucial method to identify and evaluate the system weak link. It is widely used in the optimization design and maintenance decision of aviation, aerospace, nuclear energy and other systems. The dissimilar redundancy actuation system (DRAS) is a key aircraft control subsystem which performs aircraft attitude and flight trajectory control. Its performance and reliability directly affect the aircraft flight quality and flight safety. This paper considers the influence of the Birnbaum importance measure (BIM) and integrated importance measure (IIM) on the reliability changes of key components in DRAS. The differences of physical fault characteristics of different components due to performance degradation and power mismatch, are first considered. The reliability of each component in the system is then estimated by assuming that the stochastic degradation process of the DRAS components follows an inverse Gaussian (IG) process. Finally, the weak links of the system are identified using BIM and IIM, so that the resources can be reasonably allocated to the weak links during the maintenance period. The proposed method can provide a technical support for personnel maintenance, in order to improve the system reliability with a minimal lifecycle cost.
15 March 2023 in Eksploatacja i Niezawodność – Maintenance and Reliability
Maintenance can improve a system’s reliability in a long operation period or when a component has failed. The reliability modeling method that uses the stochastic process degradation model to describe the system degradation process has been widely used. However, the existing reliability models established using stochastic processes only consider the internal degradation process, and do not fully consider the impact of external random shocks on their reliability modeling. Furthermore, the existing theory of importance does not consider the actual factors of maintenance cost. In this paper, based on the reliability modeling of random processes, the degradation rate under the influence of random shocks is introduced into the time scale function to solve the impact of random shocks on product reliability, and two cost importance measures are proposed to guide the maintenance selection of the components under limited resources in the system.Finally, a subsystem of an aircraft hydraulic system is analyzed to verify the proposed method’s performance.