The use of the Liebermann–Burchard reaction in this study has been explored in the development of a simple, reliable, and robust quantitative electrochemical method to assay cholesterol, and hence provide a good alternative to colorimetric methods. The optimization of batch mode operation for electrochemical oxidation of cholesterol in the Liebermann–Burchard reagents included the applied potential and acidic volume. Tested using chronoamperometry, the developed method showed a high sensitivity (14.959 μA mM⁻¹) and low detection limit (19.78 nM) over a 0.025–3 mM concentration range, with remarkable linearity (R² = 0.999), proving an analytical performance either higher or comparable to most of the cholesterol sensors discussed in literature. The influence of possible interfering bioactive agents, namely, glucose, uric acid, ascorbic acid, KCl and NaCl, has been evaluated with no or negligible effects on the measurement of cholesterol. Our study was directed at finding a new approach to chemical processing arising from the use of external potential as an additional level of control for chemical reactions and the transfer of electrons between surfaces and molecules. Finally, the optimized method was successfully applied for the determination of cholesterol content in real blood samples.

We have designed and synthesized a series of novel, supramolecular, long-lived fluorescent probes based on the host-guest inclusion complexes formation between fluorescent indolizinyl-pyridinium salts and β-cyclodextrin. Fluorescence and electrospray ionisation mass spectrometry experiments, supported by theoretical molecular docking studies, were utilized in the monitoring of the inclusion complexes formation, evidencing the appearance of corresponding 1:1 and 1:2 species. Additionally, the influence of the guest molecule over the aggregation processes of the cyclodextrin inclusion complexes was investigated by transmission electron microscopy. The absence of cytotoxicity, cellular permeability, long-lived intracellular fluorescence, and in time specific accumulation within acidic organelles identified the investigated supramolecular entities as remarkable candidates for intracellular fluorescence probes. Co-staining experiments using specific organelle markers revealed the fact that, after a 24-h incubation period, the inclusion complexes accumulate predominantly in lysosomes rather than in mitochondria. This study opens new possibilities for a broad range of fluorescent dyes with solubility and high toxicity issues, able to form inclusion complexes with β-cyclodextrin, to be tested as intracellular fluorescence probes.

This study presents a comparative analysis of gold nanoparticles electrodeposited on different two-dimensional materials used as electrode substrates, graphene (Gr) and MoS₂, or co-deposited with the metallic material MoS₂. The morphological and electrochemical data demonstrate the efficiency of the electrodeposition process and the preferability of gold nanoparticles for certain attachment sites depending on the nature of the material used as a substrate and the deposition method used. The electrocatalytic activity of the gold nanoparticles obtained in these configurations was evaluated via the oxidation of nitrite ions (NO₂⁻), using both qualitative and quantitative approaches, by cyclic voltammetry and amperometry techniques. The electrocatalytic activity of gold nanoparticles co-deposited with MoS₂ is superior compared to that of gold nanoparticles deposited either on bare gold electrodes or on 2D materials (graphene and MoS₂), showing good performance with a specific sensitivity of 1.043 μA µM⁻¹ cm⁻² on the linear range of 0.5–600 µM nitrite, with a limit of detection of 0.16 µM and good anti-interference ability.

In clinical and preclinical magnetic resonance imaging (MRI), image quality is often limited by intrinsic tissue contrast, so paramagnetic agents are used to amplify relaxation differences and improve lesion detectability. Widely used gadolinium-based contrast agents present recognized drawbacks, stimulating interest in nanoscale platforms with tuneable magnetic and biological properties. This review provides a critical analysis on the use of metal-doped carbon nanodots (C-dots) as MRI contrast candidates. We briefly revisit MRI signal formation, spin–lattice ($T_1$) and spin–spin ($T_2$) relaxation, and relaxometric parameters $r_1$ and $r_2$ and outline how pulse-sequence choice favours $T_1$- or $T_2$-dominant agents. We compare approved small-molecule agents with nanostructured systems, highlighting unmet needs in safety, field-strength dependence, multimodality, and organ-specific imaging. A central focus is how nano- and molecular architectures of metal-doped carbon dots govern $r_1$ and $r_2$: the metal species and oxidation state, its location within the carbon matrix, surface chemistry and hydration, and the accessibility for proton and water exchange can shift performance toward $T_1$ or $T_2$. Engineered C-dots with controlled composition and metal dopants have proven to pair improved relaxivity with fluorescence, targeting ligands, or therapeutic payloads. Overall, metal-doped C-dots represent a flexible and potentially safer alternative to classical contrast agents; however, successful clinical translation and market uptake will still require standardized relaxometry at clinical field strengths, scalable and reproducible synthesis, and comprehensive in vivo safety and efficacy validation.

Hybrid nanomaterials that integrate surface functionality, colloidal stability, and efficient electron-transfer pathways are highly attractive for improving electrochemical sensing performance. Herein, we report the fabrication and evaluation of polyethyleneimine-functionalized gallium nitride nanoparticles (GaN) decorated with gold nanoparticles (GaN-PEI-Au) as a tunable electrode modifier for enhanced differential pulse voltammetry (DPV) detection of erythromycin. Branched polyethyleneimine was employed as a multifunctional interfacial layer to stabilize GaN dispersions, introduce amine-rich surface chemistry, and enable in situ gold nanoparticle formation at the GaN-PEI. The optimized GaN-PEI-Au material exhibited high colloidal stability, a characteristic Au localized surface plasmon resonance in the ~520–525 nm range, and well-defined Au nanoparticles attached to the GaN surface. When applied as an electrode coating, GaN-PEI-Au significantly enhanced the erythromycin oxidation response compared to bare Au and GaN-PEI interfaces, consistent with synergistic increases in electroactive surface area and interfacial charge-transfer efficiency. Under optimized DPV conditions, GaN-PEI-Au-modified electrodes enabled quantitative erythromycin determination with a linear range of 5 nM–2 µM (R² = 0.990), sensitivity of 1.32 × 10⁻³ µA nM⁻¹, and a limit of detection of 52.5 nM, while maintaining stable baseline behavior during repeated scans. The reported GaN-PEI-Au nanocomposites represent a robust platform for sensitive electrochemical detection of pharmaceutical compounds.